Cornwall · England
Bath Re-enamelling for No Man's Land homes
We travel to No Man's Land for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Bath re-enamelling in No Man's Land, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We are often asked to fix an original cast iron bath that needs restoring and worn patches where water runs and sits, across basins & shower trays, cast iron baths and Victorian roll-tops.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- No Man's Land (PL13)
- County
- Cornwall
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Why No Man's Land customers choose us
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Straight answers about what a repair can do
- No extra charge for your area
Take a look at our full price list and resurfacing vs replacement cost guide.
What else we do in No Man's Land
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have a window or extractor fan available
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Get a quote
For a price in No Man's Land, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
About No Man's Land
No Man's Land is about 5 miles south of Liskeard, in Cornwall. From the centre of No Man's Land to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
Postcode districts we cover here: PL13. We also cover the places around No Man's Land: Widegates (1 mile north-east), Shortacross (1 mile north-east), St Martin (1 mile south-west), Sandplace (2 miles west) and Plaidy (2 miles south). Larger places within reach include Stonehouse (12 miles east), Bodmin (14 miles north-west), Saltash (9 miles east), Liskeard (5 miles north), Sandy Bottom (15 miles west) and Addington (5 miles north).
Landmarks near No Man's Land
Our customers here include homes close to Looe Community Academy, Church of St Wenna and Trenode CofE VA Primary Academy and the streets around them. The closest station to No Man's Land is Sandplace station, roughly 1.7 miles west. Well-known places in the area include Old Guildhall Museum and Gaol (2.5 miles south-west). The countryside around No Man's Land includes Looe Island.
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Landlord and trade work in No Man's Land
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
No Man's Land questions
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Aftercare tips
After the repair has cured, a few habits help it last:
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
What we are called out for in No Man's Land
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
Before you book anyone
- When it can be used again
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
