Moray · Scotland
Bath Re-enamelling in Portgordon
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Portgordon. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- Colour mixed on the day to match
- Fixed prices from your pictures
Take a look at our pricing or resurfacing vs replacement cost guide.
Bath re-enamelling in Portgordon, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s brown or grey marks that don’t clean off and wear marks under the taps, we can help, on basins & shower trays, Victorian roll-tops and cast iron baths alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Portgordon (AB56)
- County
- Moray
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Portgordon. The price depends on:
- How many areas need work
- The material
- How easy the damage is to reach
- The colour and finish to match
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- What it’s made of, if you know
To get a price, send two or three photos through our quote form or call us. We’ll say right away if a repair is the right fix.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs immediately
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Our work in Portgordon
Portgordon is about 2 miles south-west of Buckie, in Moray. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We work in 58 places across Moray, from the larger towns to small villages.
Our visits in AB56 work the same way as everywhere else we cover. Whether you live on Station Road, Richmond Terrace and Crown Terrace or anywhere nearby, we can come to you. We also cover the places around Portgordon: Arradoul (1 mile east), Buckie (2 miles north-east), Upper Dallachy (2 miles south-west), Nether Dallachy (2 miles west) and Bogmoor (2 miles west). Within a short drive, we also cover Elgin (11 miles west), Lossiemouth (11 miles west), Keith (9 miles south), Ashgrove (11 miles west), Portknockie (6 miles north-east) and Cullen (8 miles east). Some remote addresses need extra planning, so it’s best to call first.
Landmarks near Portgordon
We visit homes around Buckie High School. Further afield, we also cover the area around Gordon Castle (3.9 miles south-west) and Seafield Hospital (1.4 miles east). Not far away are The Lake.
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Related advice
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Towns and villages near Portgordon
Other services in Portgordon
Questions from Portgordon
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you cover Portgordon?
Yes. We cover the whole UK and travel to Portgordon and the rest of Moray. Send us pictures for a fixed quote, or call 0345 017 0787.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What we are called out for in Portgordon
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
Send us a photo if you notice any of these:
- Thin, worn enamel in places
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
What to look for in a quote
- How soon you can use it again
- Who turns up on the day
- How the colour is matched
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
