Lancashire · England
Bath Re-enamelling in Shireshead
Local bath re-enamelling for Shireshead: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our bath re-enamelling in Shireshead
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on cast iron baths, basins & shower trays and pressed steel baths, and people most frequently call us about a peeling or bubbling previous coating and stains that won’t shift.
You get a one-year guarantee, the same in Shireshead as everywhere else we work.
- Location
- Shireshead (PR3)
- Region
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Let us know if it has been repaired before
How to get a price
Email us photos of the damage and a wider shot of the entire item, and tell us you are in Shireshead, and we’ll reply with a fixed quote.
Related advice
Landlords, agents and businesses in Shireshead
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
FAQs for Shireshead
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Which areas do you work in?
We work UK-wide. Prices don’t change with location.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Also near Shireshead
What else we do in Shireshead
Shireshead and nearby
Shireshead is about 7 miles south of Lancaster, in Lancashire. From the centre of Shireshead to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 482 places across Lancashire, from the larger towns to small villages. Our nearest city page is Liverpool, about 38 miles away.
Postcode districts we cover here: PR3. Streets in the area include Stony Lane, Richmond Hill Lane and Miller's Brow, and we cover them all. Nearby, we also work in Hollins Lane (1 mile west), Forton (1 mile west), Potters Brook (1 mile north-west), Scorton (1 mile south) and Bay Horse (1 mile north). We also work in nearby towns such as Preston (13 miles south), Lancaster (7 miles north), Morecambe (9 miles north-west), Fulwood (12 miles south), Fleetwood (11 miles west) and Thornton (11 miles south-west).
What’s near Shireshead
We visit homes around Church of St.Paul and Forton Primary School and the streets around them. Other landmarks nearby include Greenhalgh Castle (3.7 miles south). Open spaces near Shireshead include Nicky Nook and Winmarleigh and Cockerham Moss.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- How much damage there is
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
Phone pictures are fine. Make sure they show:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- One picture of the entire bath
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Repairing versus replacing in Shireshead
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Shireshead
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
- Fixed prices from your photos
- Every repair guaranteed for a year
Read our prices page or guide to resurfacing and replacement costs.
Common problems we fix in Shireshead
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The things clients typically mention when they call include:
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Questions to ask before booking
- Whether the colour is mixed to match
- What prep work is covered
- When it can be used again
- Whether a trained technician does the job
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
