East Lothian · Scotland
Bath re-enamelling & resurfacing in Preston, East Lothian
Our technicians come to Preston for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Don’t let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Bath re-enamelling at your home in Preston
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are an old resurfacing that’s failing and a coloured bath you want in white.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Preston (EH40)
- Area hub
- East Lothian
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Unusual colours or finishes
- How many areas need work
- The material and finish
- How easy the damage is to reach
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- A close-up of the damage, in focus
- Where you are, by postcode
- What it’s made of, if you know
- One picture of the entire bath
If you’re in Preston and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Signs you need bath re-enamelling in Preston
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
- A roll-top that’s seen better days
Before you book anyone
- Whether the price covers travel
- Aftercare advice
- How the colour is matched
- How soon you can use it again
Repairing versus replacing in Preston
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Preston
- We will tell you if it’s not worth repairing
- A fixed quote before booking
- We come to you, anywhere in the UK
- Normally one visit, start to finish
Read our pricing and guide to resurfacing and replacement costs.
Landlord and trade work in Preston
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Related advice
Covering Preston
Preston is about 5 miles west of Dunbar, in East Lothian. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Preston is one of 48 towns and villages in East Lothian we cover. We work right across the region, from Preston to Edinburgh (22 miles away).
Here we cover the EH40 postcode area. We also cover the places around Preston: Phantassie (1 mile south), Smeaton (1 mile north-west), East Linton (1 mile south-west), Stenton (3 miles south-east) and Garvald (4 miles south). Further out, we also cover Haddington (6 miles south-west), Dunbar (5 miles east), Tranent (12 miles west), North Berwick (5 miles north-west), Prestonpans (13 miles west) and Cockenzie and Port Seton (12 miles west).
Around Preston
Locally, our jobs take us to homes close to Prestonkirk Parish Church and The Crown & Kitchen pub and the streets around them. Preston’s nearest station is East Linton station, about 0.7 miles south-west of the centre. Other landmarks nearby include Hailes Castle (2 miles south-west) and National Museum of Flight (2.7 miles west). The countryside around Preston includes Traprain Law.
When we would advise against a repair
A repair isn’t right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Towns and villages near Preston
More services for Preston
Common questions in Preston
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Preston?
We do. We send a technician to Preston for every job, with no extra charge for travel.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We give you timings with the quote.
About our accreditations · Every repair comes with a one-year guarantee.
