Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Queens Park, Cheshire West and Chester
Our repair technicians come to Queens Park for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Bath re-enamelling in Queens Park without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We regularly repair Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people get in touch are a peeling or bubbling previous coating and stains that won’t shift.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Queens Park (CH3, CH4, CH1)
- County
- Cheshire West and Chester
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Queens Park
Other services in Queens Park
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Where we work around Queens Park
Queens Park is about 1 mile south-east of Chester, in Cheshire West and Chester. Wherever you are in the CH3 postcode area, we come to you. We cover all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. We work right across the region, from Queens Park to Liverpool (16 miles away).
We cover every part of CH3, CH4 and CH1. Jobs here include addresses on Percy Road, Heath Lane and Sandy Lane. Nearby, we also work in Boughton (1 mile north-west), Handbridge (1 mile west), Huntington (1 mile south-east), Chester (1 mile north-west) and Hoole (1 mile north-east). Larger places within reach include Ellesmere Port (7 miles north), Winsford (14 miles east), Neston (11 miles north-west), Frodsham (10 miles north-east), Whitby (7 miles north) and Hartford (14 miles east).
Around Queens Park
In Queens Park, that means homes near Bishops' Blue Coat Church of England High School, St Luke's and Boughton Heath Academy. Also close by are Dee House (0.6 miles north-west), The Carlton Tavern (less than half a mile west) and Grosvenor Park (0.6 miles north-west). The nearest railway station is Chester station, roughly 0.9 miles north. Other landmarks nearby include Countess of Chester Hospital (2 miles north-west) and Chester (under half a mile west). The countryside around Queens Park includes Hockenhull Platts.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we are called out for in Queens Park
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Stains that will not shift
- Thin, worn enamel in places
- An old resurfacing that’s failing
Comparing quotes
- Who will actually do the work
- What prep work is covered
- How the room is protected while they work
- How long it needs to cure
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath that is rusted through
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the day after. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why Queens Park customers choose us
- Honest advice, even when it means no job
- Colour mixed on the day to match
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and guide to resurfacing and replacement costs.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Open a window if you can
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Queens Park questions
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
About our accreditations · Every repair comes with a one-year guarantee.
