Cumbria · England
Bath re-enamelling & resurfacing in Rampside, Cumbria
Full bath re-enamelling and resurfacing in Rampside, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
Common questions in Rampside
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you work in Rampside?
Yes, we do. Technicians travel to Rampside from across the region, and the price is the same as everywhere else.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Bath re-enamelling at your home in Rampside
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Whether it’s several chips and rust patches and a bath in a colour that no longer suits, we can help.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Rampside (LA13)
- Area hub
- Cumbria
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. It normally takes the best part of a day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
How to prepare
- Open a window if you can
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Ask for a price
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Rampside, and we will reply with a fixed quote.
Read more
Where we work around Rampside
Rampside is about 3 miles south-east of Barrow-in-Furness, in Cumbria. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Rampside is one of 438 places in Cumbria we cover. Our jobs stretch from Rampside to Liverpool (48 miles away).
All of LA13 is within our area. Whether you live on Waver Court, Bow Windows Avenue and Hall Garth or anywhere nearby, we can come to you. If you’re just outside Rampside, we cover Roa Island (1 mile south-west), Roosebeck (1 mile north-east), Downfield (2 miles north), Leece (2 miles north) and Risedale (2 miles north-west). Within a short drive, we also cover Barrow-in-Furness (3 miles north-west), Ulverston (8 miles north), Hindpool (3 miles north-west), Dalton-in-Furness (5 miles north), Vickerstown (4 miles west) and Millom (10 miles north-west).
Around Rampside
Typical jobs here are in homes near St Michael's and The Concle Public House and the streets around them. The nearest railway station is Roose station, roughly 2.3 miles north-west of the centre. Nearby you will also find Portland Walk Shopping Centre (3.1 miles north-west) and Piel Castle (1.7 miles south).
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
- Have chips seen to early
- Repair dripping taps early
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- One visit for most repairs
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
See our full price list or guide to resurfacing and replacement costs.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath that is rusted through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Rampside
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
What we are called out for in Rampside
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Common reasons people in Rampside contact us include:
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
Questions to ask before you book
- How your room will be protected
- How long the guarantee is and what it covers
- Who will actually do the work
- A fixed price, and whether VAT is included
Landlords, agents and businesses in Rampside
Landlords, letting agents and housing providers in Rampside use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Places near Rampside
Also in Rampside
About our accreditations · Every repair comes with a one-year guarantee.
