Kent · England
Bath re-enamelling & resurfacing in River, Kent
Damaged bath in River? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
How we handle bath re-enamelling in River
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a coating lifting around the plughole and a bath that stays dull however much you clean it, we can generally put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- River (CT17, CT16)
- County
- Kent
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in River?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- Several chips and rust patches
- A bath that stays dull however much you clean it
- A coloured bath you want in white
What your quote should include
- How changes to the job are handled
- A fixed price, and whether VAT is included
- How your room will be protected
- How soon you can use it again
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Respect the curing time we give you
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Prices start from £350. We price every job individually. What matters most is:
- Unusual colours or finishes
- The size and number of damaged areas
- Any earlier repairs that need removing first
- What the surface is made of
Our prices are the same across the UK, with no extra for River. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- Any details about the material
- One picture of the entire bath
- Details of any past repairs
For a price in River, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Your questions about bath re-enamelling in River
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in River.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
What areas do you cover?
Across the UK, and that includes River. Prices do not change with location.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Other services in River
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. On site, it takes most of the day in most cases. We leave the room clean and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Ensure the room can be ventilated
- Clear the area around the damage
- Mention any parking restrictions or tricky access
Ask for a price
Most customers in River get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Our work in River
River is about 1 mile north-west of Dover, in Kent. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. River is one of 922 places in Kent we cover. Our jobs stretch from River to London (about 64 miles away).
We work across CT17 and CT16. Streets in the area include Lower Road, Minnis Lane and London Road, and we cover them all. Close by, we cover Kearsney (1 mile north-west), Temple Ewell (1 mile north-west), Dover (1 mile south-east), Whitfield (1 mile north-east) and Maxton (2 miles south). Further out, we also cover Canterbury (13 miles north-west), Folkestone (6 miles south-west), Ramsgate (15 miles north-east), Deal (7 miles north-east), Hythe (10 miles south-west) and Walmer (7 miles north-east).
What’s near River
Typical jobs here are in homes near Dover Christ Church Academy, Church of St Peter and Old Park Hill. Other local landmarks include St Edmund's Catholic School (1.4 miles south-east), Royal Oak Cottage The Royal Oak Public House (less than half a mile south) and River Primary School (less than half a mile south-west). For rail, the closest station is Kearsney station, roughly 0.5 miles north-west of the centre. A little further out are Crabble Corn Mill (under half a mile south-east) and Dover Castle (2.2 miles south-east). Green spaces nearby include Dover Western Heights.
Repairing versus replacing in River
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- One visit for most repairs
- Colour mixed on the day to match
- Fixed prices from your pictures
- We come to you, anywhere in the UK
Read our pricing or bath cost comparison.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
