Glasgow · Scotland
Bath re-enamelling & resurfacing in Rosshall, Glasgow
Full bath re-enamelling and resurfacing in Rosshall, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Bath re-enamelling in Rosshall, done in place
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a coating lifting around the plughole and a dull, rough surface that won’t come clean, we can help, on Victorian roll-tops, cast iron baths and pressed steel baths alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Rosshall (G52, G53, PA1)
- Region
- Glasgow
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why us?
- Everything repaired in place
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- Every repair guaranteed for a year
Read our full price list or bath cost comparison.
Common questions in Rosshall
How much does bath re-enamelling cost in Rosshall?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What areas do you cover?
Everywhere in the UK, Rosshall included. Travel is included in the price.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you work in Rosshall?
Yes, we do. We send a technician to Rosshall for every job, with no extra charge for travel.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Common problems we fix in Rosshall
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
- A coloured bath you want in white
Before booking anyone
- If travel is included in the price
- What happens if they find more damage
- How the colour is matched
- How long it needs to cure
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Also near Rosshall
Also in Rosshall
Rosshall and nearby
Rosshall is about 2 miles south of Renfrew, in Glasgow. From the centre of Rosshall to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Rosshall is one of 183 towns and villages in Glasgow where we work.
Postcode districts we cover here: G52, G53 and PA1. From Moyne Road, Moulin Road and Glasgow Road or anywhere nearby, we can come to you. Rosshall sits on or near the A736, which makes travel easy. We also cover the places around Rosshall: Crookston (1 mile north-west), Hillington (1 mile north), Cardonald (1 mile north-east), Hawkhead (1 mile south-west) and Penilee (1 mile north). We also work in nearby towns such as Glasgow (4 miles east), Hillhead (4 miles north-east), Dowanhill (4 miles north-east), Woodlands (4 miles north-east), Woodside (4 miles north-east) and North Kelvinside (4 miles north-east).
What’s near Rosshall
Around Rosshall, we work in homes near Paisley, Barshaw Park and Rosshall Academy, among other places. There is a railway station in Rosshall itself: Crookston station. A little further out are Silverburn Shopping Centre (1.6 miles south-east) and Hawkhead Castle (0.9 miles south-west).
What affects the price in Rosshall
Resurfacing from £350. We charge the same across the UK, including Rosshall. What changes the price is:
- What the surface is made of
- The type of damage
- Whether we combine several jobs
- How many areas need work
The price reflects the work involved, not where you live. You will see the full price before you book.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- One picture of the whole bath
- A coin or ruler next to the damage for scale
- The material, if you know it
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
The process
Arrival times are agreed in advance. Once we’re there, the work takes most of the day for most jobs. We leave the room clean and you’ll know when it can be used.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Keeping it looking good
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs immediately
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
