Glasgow · Scotland
Bath Re-enamelling for Crookston homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Crookston. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Bath re-enamelling at your home in Crookston
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include a coloured bath you want in white and stains that won’t shift, across cast iron baths, Victorian roll-tops and basins & shower trays.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Crookston (G52, PA1, G53)
- Region
- Glasgow
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Crookston. The price comes down to:
- Unusual colours or finishes
- What the surface is made of
- What kind of damage it is
- How easy the damage is to reach
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Two or three clear photos are normally enough. It helps if you send:
- Any details about the material
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Details of any past repairs
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Crookston and the surrounding area
Crookston is about 2 miles south of Renfrew, in Glasgow. Jobs in Crookston are booked in like any other job: a fixed quote from photos, then a visit to do the work. Crookston is one of 183 towns and villages in Glasgow we cover.
Every address in G52, PA1 and G53 is covered. That includes homes on Moulin Road, Glasgow Road and Newnham Road. Crookston is on the A736, so it’s easy for us to reach. If you are just outside Crookston, we cover Rosshall (1 mile south-east), Hillington (1 mile north-east), Penilee (1 mile north), Cardonald (1 mile north-east) and Hawkhead (1 mile south-west). Larger places within reach include Glasgow (4 miles east), Hillhead (4 miles north-east), Dowanhill (4 miles north-east), Woodlands (4 miles north-east), Woodside (4 miles north-east) and North Kelvinside (4 miles north-east).
What’s near Crookston
Around Crookston, we work in homes near Barshaw Park, Rosshall Academy and Paisley, among other places. There is a railway station in Crookston itself: Crookston station. A little further out are Leverndale Hospital (0.6 miles south) and Silverburn Shopping Centre (1.8 miles south-east).
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
- Most jobs done in one visit
- Every repair guaranteed for a year
Take a look at our prices page or resurfacing vs replacement cost guide.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Let us know about parking or access
How to get a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
Questions from Crookston
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Do you cover the entire of Glasgow?
Everywhere in the UK, Crookston included. Travel is included in the price.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Landlords, agents and businesses in Crookston
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Crookston, we will quote for several properties at once. Send photos for each one and we will price them together.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Keeping it looking good
After the repair has cured, a few habits help it last:
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs right away
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Nearby places to Crookston
Other services in Crookston
About our accreditations · Every repair comes with a one-year guarantee.
