Flintshire · England
Bath Re-enamelling in Roughhill
We travel to Roughhill for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coloured bath you want in white
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Getting a price
To get a price, send two or three photos through our quote form or call us. We’ll say straight away whether it can be repaired.
Read more
Bath re-enamelling in Roughhill, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with enamel that’s lost its shine and feels rough and worn patches where water runs and sits, we can usually put it right.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Roughhill (CH4)
- County
- Flintshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Roughhill
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- An old resurfacing that is failing
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
Questions to ask before booking
- How long the guarantee is and what it covers
- Whether they match the colour on site
- Aftercare advice
- How long it needs to cure
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
- Natural light rather than flash
Send us pictures of the damage and one of the whole item, and tell us you’re in Roughhill, and we will reply with a fixed quote.
Roughhill: your questions answered
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How do I get a price for bath re-enamelling in Roughhill?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What areas do you cover?
We work UK-wide, and that includes Roughhill. Prices don’t change with location.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
What else we do in Roughhill
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
Materials we work on in Roughhill
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- One-year guarantee on every repair
- Colour-matched on site
- Everything repaired in place
- One price list for the entire UK
See our full price list and bath cost comparison.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Roughhill and the surrounding area
Roughhill is about 3 miles south-west of Chester, in Flintshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Roughhill is one of 139 towns and villages in Flintshire where we work. You can also see our page for Liverpool, about 17 miles away.
All of CH4 is covered. Neighbouring places we cover include Balderton (1 mile west), Belgrave (1 mile south), Cuckoo's Nest (1 mile south), Lache (1 mile north) and Dodleston (1 mile south-west). Further out, we also cover Connah's Quay (7 miles north-west), Buckley (7 miles west), Bwcle (6 miles west), Flint (11 miles north-west), Mold (9 miles west) and Holywell (15 miles north-west).
Around Roughhill
Around Roughhill, we work in homes near St David's High School and Westminster Park, among other places. The nearest railway station is Chester station, roughly 3.4 miles north-east of the centre. Other landmarks nearby include Chester Castle (2.5 miles north-east) and Broughton Shopping Park (2.2 miles north-west).
- Other local spots include Chester (2.6 miles north-east)
About our accreditations · Every repair comes with a one-year guarantee.
