Flintshire · England
Bath re-enamelling & resurfacing in Belgrave, Flintshire
Bath re-enamelling in Belgrave without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The type of damage
- How many areas need work
- Whether we combine several jobs
- The colour and finish to match
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
You can usually get a fixed price without us visiting. To make it quick:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- One picture of the whole bath
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Bath re-enamelling at your home in Belgrave
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a bath that stays dull however much you clean it and thin, worn enamel in places, across acrylic baths, pressed steel baths and Victorian roll-tops.
A one-year guarantee comes as standard.
- Area
- Belgrave (CH4)
- Region
- Flintshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It generally takes most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
Getting a price
Email us pictures of the damage and a wider shot of the whole item, with your CH4 postcode, and we will come back with a fixed quote.
Read more
Landlords, agents and businesses in Belgrave
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Belgrave, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Looking after it afterwards
Nothing complicated is needed:
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Questions from Belgrave
Are there extra charges for Belgrave?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Belgrave.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What we cannot put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
About Belgrave
Belgrave is about 4 miles south of Chester, in Flintshire. Anywhere in CH4, a technician comes to you. Belgrave is one of 139 towns and villages in Flintshire where we work. Our nearest city page is Liverpool, about 18 miles away.
Every address in CH4 is covered, from the main roads to the quietest streets. If you are just outside Belgrave, we cover Cuckoo's Nest (1 mile south-west), Roughhill (1 mile north), Balderton (1 mile north-west), Poulton (1 mile south-east) and Dodleston (1 mile west). Larger places within reach include Connah's Quay (8 miles north-west), Buckley (7 miles west), Bwcle (7 miles west), Flint (11 miles north-west), Mold (9 miles west) and Holywell (15 miles north-west).
Near you in Belgrave
Our clients here include homes close to Darland High School. Belgrave’s nearest station is Chester station, about 3.9 miles north-east of the centre. A little further out are Chester Castle (3 miles north) and Sick To Death (3.2 miles north).
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why choose Surface Doctor in Belgrave
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Nothing taken out or refitted
Take a look at our prices page or bath cost comparison.
More services for Belgrave
Common problems we fix in Belgrave
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Look out for these signs:
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
- An old resurfacing that is failing
What to look for in a quote
- Whether cleaning and preparation are in the price
- How to look after the finish
- How changes to the job are handled
- If travel is included in the price
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
