Shropshire · England
Bath re-enamelling & resurfacing in Balmer Heath, Shropshire
Bath re-enamelling for Balmer Heath, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An old resurfacing that is failing
- A roll-top that is seen better days
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Bath re-enamelling in Balmer Heath, done in place
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Whether it’s brown or grey marks that don’t clean off and a period or roll-top bath worth keeping, we can normally put it right, whatever the material.
All our work comes with our one-year guarantee, wherever you are in Shropshire.
- Location
- Balmer Heath (SY12)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Balmer Heath: your questions answered
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you come to Balmer Heath?
Yes. We work across the UK and travel to Balmer Heath. Send photos and we’ll quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Do you need bath re-enamelling in Balmer Heath?
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Send us a photo if you notice any of these:
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Several chips and rust patches
- A coating lifting around the plughole
What your quote should include
- If travel is included in the price
- How soon you can use it again
- The length of the guarantee and what it covers
- How the room is protected while they work
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Repair or replace in Balmer Heath?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Colour mixed on the day to match
- Dust sheets down, tidy finish
- Normally one visit, start to finish
- CHAS and Constructionline accredited
Read our pricing and bath cost comparison.
Landlord and trade work in Balmer Heath
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
What we can’t put right
Before you book, it’s worth knowing the limits too:
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Balmer Heath
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Also near Balmer Heath
More services for Balmer Heath
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
What affects the price in Balmer Heath
Resurfacing from £350. We don’t charge extra for travel to Balmer Heath. The price depends on:
- How easy the damage is to reach
- The colour and finish to match
- Whether we combine several jobs
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send photos for a quote
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- One picture of the whole bath
- What it’s made of, if you know
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Our work in Balmer Heath
Balmer Heath is about 8 miles south-west of Whitchurch, in Shropshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 433 places in Shropshire, from the larger towns to small villages. You can also see our page for Liverpool, about 35 miles away.
All of SY12 is within our area. If you’re just outside Balmer Heath, we cover Breaden Heath (1 mile north), Welshampton (1 mile north-west), Rowe (1 mile north-east), Maelor South (3 miles north) and Ellesmere (3 miles west). Larger places within reach include Shrewsbury (14 miles south), Oswestry (10 miles west), Market Drayton (14 miles east), Coleham (14 miles south), Kingsland (14 miles south) and Whitchurch (8 miles north-east).
What’s near Balmer Heath
Typical jobs here are in homes near Church of St John the Evangelist and Welshampton CofE Primary School and the streets around them. Other landmarks nearby include Ellesmere Castle (2.5 miles west) and Penley Community Hospital (4.1 miles north-west). Green spaces nearby include Newton Mere.
About our accreditations · Every repair comes with a one-year guarantee.
