Telford and Wrekin · England
Bath re-enamelling & resurfacing in Rushmoor, Telford and Wrekin
Bath re-enamelling in Rushmoor without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Wear marks under the taps
Bath re-enamelling at your home in Rushmoor
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with brown or grey marks that don’t clean off and chips and rust in more than one place, we can help.
In a village or hamlet like Rushmoor, homes are often older cottages, farmhouses and barn conversions. Some have heavy cast iron baths or tight bathrooms, and removing a bath from an older house is rarely simple. Repairing in place avoids that.
You get a one-year guarantee, the same in Rushmoor as everywhere else we work.
- Where
- Rushmoor (TF6)
- Area hub
- Telford and Wrekin
- Warranty
- A year, on every repair
- Price
- From £350. Fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- How easy the damage is to reach
- The material
- Doing more than one item at once
- Any earlier repairs that need removing first
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what helps:
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes cost nothing and you’re under no obligation.
Places near Rushmoor
Other services in Rushmoor
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Telford and Wrekin and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
If you manage property in Rushmoor, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Repairing versus replacing in Rushmoor
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. For a rural home like those around Rushmoor, a replacement means trades travelling out and waste being taken away, while bath re-enamelling is one trip.
Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Rushmoor. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Fixed quotes from pictures
- Straight answers about what a repair can do
- No extra charge for your area
- Most jobs done in one visit
See our Prices page And Bath cost comparison.
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Rushmoor questions
Do you work for landlords with property near Wellington (Shropshire) station?
Yes, rental work is a big part of what we do, and a repair between tenants is typically quicker than replacing.
Is it worth repairing old baths in a period home in Rushmoor?
Normally: period pieces can be hard to match if replaced. We’ll give you an honest view from pictures.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Do you cover the whole of Telford and Wrekin?
We cover the whole UK, including Rushmoor and the rest of Telford and Wrekin. Just include your postcode and we’ll offer you dates.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Rushmoor homes and their baths
Rented homes near Wellington (Shropshire) station (about 2.5 miles south-east) change hands often, and repairing baths between tenants is quicker than replacing them. For older houses around Rushmoor, near landmarks such as Church of St Peter, an original cast iron or steel bath is worth keeping, and bath re-enamelling gives it years more use.
Rushmoor is about 5 miles north-west of Telford, in Telford and Wrekin. Whether you’re in the middle of Rushmoor or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Rushmoor is one of 79 towns and villages in Telford and Wrekin we cover. You can also see our page for Birmingham, about 33 miles away.
Here we cover the TF6 postcode area for bath re-enamelling. Neighbouring places we cover for bath re-enamelling include Cross Green (1 mile south), Allscott (1 mile south-west), Admaston (1 mile east), Bratton (1 mile east) and Walcot (1 mile south-west). Within a short drive, we also cover Telford (5 miles south-east), Wellington (3 miles south-east), Dawley (6 miles south-east), Oakengates (5 miles east), Newport (9 miles north-east) and The Rock (5 miles south-east).
Near you in Rushmoor
The nearest railway station is Wellington (Shropshire) station, about 2.5 miles south-east of the centre. A little further out are Charlton Castle (1.9 miles south-west) and Princess Royal Hospital (2.5 miles east). For a walk, there is The Ercall.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to most of the day, including clearing up. Somewhere as small as Rushmoor, access is generally the main thing to plan. Once we’re there, the bath re-enamelling works exactly as anywhere else.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Ensure the area is dry
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Ask for a price
Send us a picture of the damage and one of the whole item, with your TF6 postcode, and we will reply with a fixed quote.
Read more
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
