Telford and Wrekin · England
Bath re-enamelling & resurfacing in Walcot, Telford and Wrekin
Damaged bath in Walcot? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Bath re-enamelling at your home in Walcot
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We are frequently asked to fix enamel that’s lost its shine and feels rough and worn patches where water runs and sits, in pressed steel baths, basins & shower trays and acrylic baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Walcot (TF6)
- Area hub
- Telford and Wrekin
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Walcot and nearby
Walcot is about 6 miles west of Telford, in Telford and Wrekin. Wherever you are in the TF6 postcode area, a technician comes to you. Walcot is one of 79 places in Telford and Wrekin we cover. Our nearest city page is Birmingham, about 34 miles away.
We work across the TF6 postcode area. Main roads around Walcot include the B4394, which makes travel easy. Neighbouring places we cover include Allscott (1 mile north-east), Cross Green (1 mile north-east), Rushmoor (1 mile north-east), Admaston (2 miles east) and Longdon on Tern (3 miles north). Further out, we also cover Telford (6 miles east), Wellington (3 miles east), Dawley (6 miles south-east), Oakengates (6 miles east), Newport (10 miles north-east) and The Rock (5 miles east).
Landmarks near Walcot
In Walcot, that means homes near The Grove Hotel. Walcot’s nearest station is Wellington (Shropshire) station, roughly 3.3 miles east. Other landmarks nearby include Princess Royal Hospital (3.5 miles east) and Charlton Castle (0.6 miles south). Green spaces nearby include The Ercall.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Getting a price
Send us a photo of the damage and a wider shot of the entire item, and tell us you’re in Walcot, and we will come back with a fixed quote.
Advice
Aftercare tips
So the finish stays in good condition:
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Respect the curing time we give you
- A dripping tap should be fixed promptly
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What affects the price in Walcot
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How many areas need work
- Where the damage is and how we get to it
- How hard the colour is to match
- The type of damage
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
How to get a fixed price
Before you send pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath split right through the body
- Steel that has corroded right through
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think.
Materials we work on in Walcot
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Walcot
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Also near Walcot
More services for Walcot
Common problems we fix in Walcot
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Customers usually contact us about:
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- Several chips and rust patches
What to look for in a quote
- How the room is protected while they work
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- How long it needs to cure
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Most jobs done in one visit
- Work done at your home or business
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
Take a look at our prices page and resurfacing vs replacement cost guide.
Common questions in Walcot
What areas do you cover?
The whole UK, including all of Telford and Wrekin. Send your postcode with your photos and we’ll offer you dates.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you do the outside of a roll-top?
Yes. Inside and out.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Are there extra charges for Walcot?
No. Our quotes include travel, and we charge the same wherever you are.
Do the materials smell?
Expect a mild smell while we’re working.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Telford and Wrekin.
About our accreditations · Every repair comes with a one-year guarantee.
