Telford and Wrekin · England
Bath Re-enamelling for Allscott homes
We travel to Allscott for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Several chips and rust patches
Bath re-enamelling at your home in Allscott
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s staining under the taps and around the waste and worn patches where water runs and sits, we can typically put it right, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Allscott (TF6)
- County
- Telford and Wrekin
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
More services for Allscott
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Repairing versus replacing in Allscott
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Allscott clients choose us
- A fixed quote before you book
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- One price list for the whole UK
Read our pricing and resurfacing vs replacement cost guide.
What we do, step by step
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Allscott: your questions answered
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
How do I get a price for bath re-enamelling in Allscott?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your TF6 postcode.
Do you resurface freestanding baths?
Yes. Inside and out.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Allscott. What changes the price is:
- Access to the area
- What the surface is made of
- How hard the colour is to match
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- A photo taken from further back
- Where you are, by postcode
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Landlord and trade work in Allscott
Landlords, letting agents and housing providers in Allscott use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Allscott and nearby
Allscott is about 5 miles west of Telford, in Telford and Wrekin. Anywhere in TF6, we come to you. Allscott is one of 79 towns and villages in Telford and Wrekin we cover. We work right across the region, from Allscott to Birmingham (33 miles away).
Jobs in TF6 work the same way as everywhere else we cover. Whether you live on Honeycope, The Clayfields and Sugar Beet Avenue or a nearby road, a technician can come to you. Other places close to Allscott include Cross Green (1 mile north-east), Walcot (1 mile south-west), Rushmoor (1 mile north-east), Admaston (2 miles east) and Bratton (2 miles north-east). Larger places within reach include Telford (5 miles east), Wellington (3 miles east), Dawley (6 miles south-east), Oakengates (6 miles east), Newport (9 miles north-east) and The Rock (5 miles south-east).
What’s near Allscott
Our clients here include homes close to Charlton School, Church of St Peter and The Grove Hotel, among other places. For rail, the closest station is Wellington (Shropshire) station, about 2.8 miles east. A little further out are Princess Royal Hospital (2.9 miles east) and Wroxeter Roman Site And Museum (3.6 miles south-west). The countryside around Allscott includes The Ercall.
Signs you need bath re-enamelling in Allscott
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Common reasons people in Allscott contact us include:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Stains that won’t shift
- A dull, rough surface that won’t come clean
Questions to ask before you book
- Whether there are any call-out or travel charges
- How long it needs to cure
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
