Staffordshire · England
Bath Re-enamelling for Scot Hay homes
Damaged bath in Scot Hay? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
Bath re-enamelling in Scot Hay, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a dull, rough surface that won’t come clean and an old resurfacing that’s failing.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Scot Hay (ST5)
- County
- Staffordshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Scot Hay
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Look out for these signs:
- A coloured bath you want in white
- Wear marks under the taps
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Before you book anyone
- How soon you can use it again
- What preparation is included
- If travel is included in the price
- How changes to the job are handled
Places near Scot Hay
More services for Scot Hay
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Looking after it afterwards
Aftercare is simple:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Scot Hay and nearby
Scot Hay is about 3 miles west of Newcastle-under-Lyme, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. Our nearest city page is Manchester, about 31 miles away.
Our visits in ST5 work the same way as everywhere else we cover. Jobs here include addresses on Bankfield Grove, Leycett Road and Crackley Lane and the roads around them. If you are just outside Scot Hay, we cover Alsagers Bank (1 mile north-east), Apedale (1 mile north-east), Miles Green (1 mile north), Silverdale (1 mile south-east) and Keele (2 miles south-east). Within a short drive, we also cover Newcastle-under-Lyme (3 miles east), Longton (7 miles east), Stone (11 miles south-east), Leek (13 miles north-east), Biddulph (8 miles north-east) and Alsager (5 miles north).
Around Scot Hay
Around Scot Hay, we work in homes near The Richard Heathcote Community Primary School, Sir Thomas Boughey High School and St. John's Alsagers Bank. For rail, the closest station is Longport station, about 3.6 miles east. Nearby you will also find Audley and Bignall End (1.9 miles north) and Heighley Castle (1.8 miles west). Open spaces near Scot Hay include Westport Lake and Parrot's Drumble.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before you book. We look at:
- Access to the area
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what helps:
- A picture taken from further back
- Any earlier repairs or coatings
- The material, if you know it
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
How the visit works
We agree an arrival time beforehand. On site, it takes most of the day for most jobs. The room is left tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
For landlords and businesses
If you manage property in Scot Hay, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Scot Hay questions
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you cover Scot Hay?
We do. We send a technician to Scot Hay for every job, with no extra charge for travel.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
About our accreditations · Every repair comes with a one-year guarantee.
