Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Scotlandwell, Perth and Kinross
Full bath re-enamelling and resurfacing in Scotlandwell, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
How we handle bath re-enamelling in Scotlandwell
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for stains that won’t shift and a bath that stays dull however much you clean it, across pressed steel baths, basins & shower trays and acrylic baths.
Big or small, it’s backed by a one-year guarantee.
- Location
- Scotlandwell (KY13)
- Area hub
- Perth and Kinross
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Scotlandwell
Also in Scotlandwell
Scotlandwell and the surrounding area
Scotlandwell is about 5 miles west of Glenrothes, in Perth and Kinross. We visit homes and businesses in Scotlandwell and nearby villages, so you do not need to take anything anywhere. We cover all 107 towns and villages in Perth and Kinross, from the larger towns to small villages. Our nearest city page is Edinburgh, about 18 miles away.
We cover every part of KY13. We regularly work on streets such as The Causeway, Wellside Park and Friar Place. Other places close to Scotlandwell include Ballingry (3 miles south), Lochore (3 miles south), Crosshill (3 miles south), Glencraig (4 miles south) and Maryburgh (5 miles south-west). Larger places within reach include Perth (15 miles north), Kinross (4 miles west), Letham (15 miles north-west), Oakbank (14 miles north-west), Hillyland (15 miles north-west) and Bridge of Earn (11 miles north).
What’s near Scotlandwell
Typical jobs here are in homes near Portmoak Parish Church and The Well Country Inn. The nearest railway station is Lochgelly station, about 4.5 miles south of the centre. A little further out are Glenrothes Hospital (5.1 miles east) and Strathenry Castle (2.5 miles east). For a walk, there’s Loch Leven National Nature Reserve and Loch Leven.
Your questions about bath re-enamelling in Scotlandwell
How much does bath re-enamelling cost in Scotlandwell?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you quote from pictures?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Perth and Kinross.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Common problems we fix in Scotlandwell
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.
People generally call us after spotting something like this:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
Before you book anyone
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- How the room is protected while they work
- Whether they match the colour on site
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether old repairs or coatings need taking off
- Access to the area
- Whether it’s a chip, crack, burn or wear
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Ask for a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Free fixed quotes from pictures
- Normally one visit, start to finish
- A year’s guarantee on all work
- We leave the room as we found it
Read our full price list and bath cost comparison.
When we’d advise against a repair
In fairness, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Send us pictures and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Send the address, pictures and access details.
About our accreditations · Every repair comes with a one-year guarantee.
