Monmouthshire · Wales
Bath re-enamelling & resurfacing in Slough, Monmouthshire
Problem with your bath in Slough? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- A coloured bath you want in white
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling at your home in Slough
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and common reasons people contact us are an original cast iron bath that needs restoring and thin, worn enamel in places.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Slough (NP15)
- County
- Monmouthshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Slough
What else we do in Slough
Aftercare tips
Looking after the surface is easy:
- Fix dripping taps quickly
- Store bottles off the bath
- Never use suction bath mats
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we are called out for in Slough
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we’re asked about most:
- Wear marks under the taps
- Stains that will not shift
- Lots of chips and rust spots
- A roll-top that’s seen better days
Questions to ask before booking
- Who will actually do the work
- Whether there are any call-out or travel charges
- What aftercare is recommended
- How the room is protected while they work
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Slough: your questions answered
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
What affects the price in Slough
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- Access to the area
- Whether we combine several jobs
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Any details about the material
- A close-up of the damage, in focus
- Details of any past repairs
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Landlords, agents and businesses in Slough
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
If you manage property in Slough, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Where we work around Slough
Slough is about 8 miles east of Pontypool, in Monmouthshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Slough is one of 115 places in Monmouthshire where we work. Our nearest city page is Birmingham, about 66 miles away.
Jobs in NP15 work the same way as everywhere else we cover. If you’re just outside Slough, we cover Gwernesney (1 mile south-east), Llangwm (1 mile south-east), Gwehelog Common (2 miles north-west), Usk (2 miles west) and Llantrisant Fawr (2 miles south). Larger places within reach include Chepstow (9 miles south-east), Abergavenny (10 miles north-west), Monmouth (9 miles north-east), Cil-y-coed (9 miles south-east), Pen-y-pound (11 miles north-west) and Bulwark (10 miles south-east).
Landmarks near Slough
Locally, our jobs take us to homes close to Church of St Michael and All Angels and The Lodge by Cefn Tilla pub and the streets around them. Nearby you will also find Rockfield Farm Motte (1 mile south-east) and Usk Rural Life Museum (2.3 miles west). Open spaces near Slough include Red Hill.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
How to prepare
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
Honest limits
Before you book, it’s worth knowing the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
