Perth and Kinross · Scotland
Bath Re-enamelling for Spittalfield homes
Bath re-enamelling for Spittalfield, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that is failing
About our bath re-enamelling in Spittalfield
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s staining under the taps and around the waste and enamel that’s lost its shine and feels rough, we can help.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Spittalfield (PH1)
- Region
- Perth and Kinross
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Spittalfield?
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Comparing quotes
- Whether they match the colour on site
- How the room is protected while they work
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Rooms protected and left tidy
- Everything repaired in place
Take a look at our prices page or guide to resurfacing and replacement costs.
More services for Spittalfield
Landlord and trade work in Spittalfield
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
FAQs for Spittalfield
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Spittalfield.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Spittalfield and nearby
Spittalfield is about 5 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Jobs in Spittalfield are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We work in 107 places across Perth and Kinross. Our jobs stretch from Spittalfield to Edinburgh (43 miles away).
Every address in PH1 is covered. Whether you live on The Green, Park Grove and Millhole Road or anywhere nearby, we can come to you. If you are just outside Spittalfield, we cover Gellyburn (1 mile south-west), Caputh (1 mile south-west), Murthly (2 miles south), Middleton (2 miles west) and Meikleour (3 miles east). Within a short drive, we also cover Perth (11 miles south), Blairgowrie and Rattray (5 miles north-east), Letham (10 miles south), Scone (9 miles south), Pitlochry (15 miles north-west) and Tulloch (10 miles south).
Landmarks near Spittalfield
The closest station to Spittalfield is Dunkeld & Birnam station, about 4.8 miles west. Further afield, we also cover the area around Lethendy House (2 miles east) and Blairgowrie Community Hospital (4.7 miles north-east). Not far away are Lily Loch and Birnam Hill.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Spittalfield
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Phone pictures are fine. Ensure they show:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- The material, if you know it
- A picture taken from further back
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes the best part of a day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
