Telford and Wrekin · England
Bath Re-enamelling in Spring Village
Full bath re-enamelling and resurfacing for homes and businesses in Spring Village and across Telford and Wrekin. Free, fixed quotes from your photos.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
About our bath re-enamelling in Spring Village
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We’re frequently asked to fix thin, worn enamel in places and a peeling or bubbling previous coating, across basins & shower trays, Victorian roll-tops and cast iron baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Spring Village (TF4)
- County
- Telford and Wrekin
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
What we are called out for in Spring Village
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
These are the problems we are asked about most:
- Several chips and rust patches
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Before booking anyone
- How the room is protected while they work
- Who turns up on the day
- How to look after the finish
- How changes to the job are handled
More services for Spring Village
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Spring Village questions
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do you cover Spring Village?
Yes, we do. We send a technician to Spring Village for every job, with no extra charge for travel.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- Same prices wherever you are
- Colour-matched on site
- Rooms protected and left tidy
- Straight answers about what a repair can do
Take a look at our prices page or resurfacing vs replacement cost guide.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Get any chip repaired quickly
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Spring Village and the surrounding area
Spring Village is about 1 mile west of Dawley, in Telford and Wrekin. Across the TF4 area, a technician comes to you. Our repair technicians cover 79 places in Telford and Wrekin. We work right across the region, from Spring Village to Birmingham (about 28 miles away).
Here we cover the TF4 postcode area. Whether you live on Farm Lane, Frame Lane and Fence Road or anywhere nearby, we can come to you. Close by, we cover Horsehay (1 mile south-west), Doseley (1 mile south), Dawley (1 mile east), Lawley (1 mile north) and The Rock (1 mile north-east). Further out, we also cover Wellington (3 miles north-west), Newport (8 miles north-east), St George’s (3 miles north-east), Priorslee (3 miles north-east), Leegomery (3 miles north) and Hadley (3 miles north).
Near you in Spring Village
Around Spring Village, we work in homes near St Lukes Church, All Labour in Vain pub and Telford Town Park. You will also find The Telford Langley School (0.8 miles east) and Dawley Church of England Primary Academy (0.5 miles east). For rail, the closest station is Telford Central station, about 2.1 miles north-east of the centre. Other landmarks nearby include Princess Royal Hospital (3.4 miles north) and New Coracle Shed (2.3 miles south). Open spaces near Spring Village include The Ercall.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The colour and finish to match
We charge the same wherever you are, so there is no premium for Spring Village. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- One sharp close-up of the damage
- The material, if you know it
- Whether it’s been repaired or coated before
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
