Lancashire · England
Bath re-enamelling & resurfacing in Tarlscough, Lancashire
Full bath re-enamelling and resurfacing in Tarlscough, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Bath re-enamelling in Tarlscough without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a roll-top that’s seen better days and brown or grey marks that don’t clean off.
Big or small, you get the same one-year guarantee in Tarlscough and across Lancashire.
- Where
- Tarlscough (L40)
- Region
- Lancashire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Your questions about bath re-enamelling in Tarlscough
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Are there extra charges for Tarlscough?
We do not add a call-out fee. Your fixed quote includes everything.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Tarlscough as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Towns and villages near Tarlscough
Other services in Tarlscough
Common problems we fix in Tarlscough
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- A peeling or bubbling previous coating
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Questions to ask before you book
- How the room is protected while they work
- The length of the guarantee and what it covers
- How changes to the job are handled
- Whether the price covers travel
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Tarlscough
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Tarlscough and nearby
Tarlscough is about 4 miles north of Ormskirk, in Lancashire. From the centre of Tarlscough to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Tarlscough is one of 482 towns and villages in Lancashire we cover. Our nearest city page is Liverpool, about 15 miles away.
Our visits in L40 work the same way as everywhere else we cover. If you are just outside Tarlscough, we cover New Lane (1 mile south-west), Burscough Bridge (1 mile south-east), Holmeswood (1 mile north), Mere Side (2 miles north) and Rufford (2 miles north-east). We also work in nearby towns such as Preston (12 miles north-east), Chorley (9 miles east), Lytham St Anne's (11 miles north-west), Bamber Bridge (11 miles north-east), Leyland (8 miles north-east) and Fulwood (13 miles north-east).
Local landmarks in Tarlscough
In Tarlscough, that means homes near Burscough Priory Academy and St Andrew, among other places. The closest station to Tarlscough is New Lane station, about 0.8 miles south-west of the centre. Nearby you will also find Ormskirk and District General Hospital (3.9 miles south). Not far away are WWT Martin Mere and Martin Mere.
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Tarlscough. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- The postcode, so we can plan the visit
- Any details about the material
- A close-up of the damage, in focus
- One picture of the entire bath
Upload a picture of the damage and one of the whole item, with your L40 postcode, and we’ll reply with a fixed quote.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Tarlscough clients choose us
- We leave the room as we found it
- Colour-matched on site
- One price list for the whole UK
- Work done at your home or business
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
