Greater London · England
Bath Re-enamelling for Temple Mills homes
Full bath re-enamelling and resurfacing in Temple Mills, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Temple Mills, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about several chips and rust patches and worn patches where water runs and sits.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Temple Mills (E20, E15, E9)
- Region
- Greater London
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Temple Mills?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- No need to remove anything
- Work done at your home or business
- Fixed prices from your photos
- CHAS and Constructionline accredited
See our prices page and bath cost comparison.
How to look after the repair
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Never use suction bath mats
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Places near Temple Mills
What else we do in Temple Mills
When to call us in Temple Mills
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Common reasons people in Temple Mills contact us are:
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
Comparing quotes
- What happens if the damage is worse than the pictures show
- How the room is protected while they work
- When it can be used again
- What preparation is included
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take most of the day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Keep a parking space free if you can
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Work for landlords and builders
For anyone letting property in or around Temple Mills, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Temple Mills. The price comes down to:
- The size and number of damaged areas
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- One picture of the whole bath
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Common questions in Temple Mills
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Our work in Temple Mills
Temple Mills is about 1 mile north-west of Stratford, in Greater London. Anywhere in E20, we carry out the work at your property. Temple Mills is one of 764 places in Greater London we cover.
Here we cover the E20, E15 and E9 postcode area. Streets in the area include Major Road, Forbes Lane and Keirin Road, all of which we cover. Main roads around Temple Mills include the A106, so getting to you is simple. We also travel to East Village (1 mile south-east), Hackney Wick (1 mile south-west), Stratford (1 mile south-east), Maryland (1 mile south-east) and Fish Island (1 mile south-west). We also work in nearby towns such as London (5 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles south-west), St Pancras (5 miles west) and Shoreditch (3 miles south-west).
What’s near Temple Mills
Around Temple Mills, we work in homes near St Eleutherius, Mossbourne Riverside Academy and Chobham Academy and the streets around them. Nearby too are Eton Manor Boys' Club (less than half a mile north), The Cow pub (0.6 miles south-east) and Mabley Green (0.8 miles west). There is a railway station in Temple Mills itself: Stratford International station. Well-known places in the area include Tower of London (3.9 miles south-west) and Queen Mary's Hospital for the East End (1 mile south-east). Open spaces near Temple Mills include Tower Hill and Hollow Pond.
- Parks and local facilities nearby include County Borough of West Ham (0.9 miles south-east)
About our accreditations · Every repair comes with a one-year guarantee.
