Moray · Scotland
Bath re-enamelling & resurfacing in Thomshill, Moray
Local bath re-enamelling for Thomshill: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
Bath re-enamelling in Thomshill, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for stains that won’t shift and an old resurfacing that’s failing, in pressed steel baths, cast iron baths and acrylic baths.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Thomshill (IV30)
- County
- Moray
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Thomshill
Thomshill is about 3 miles south of Elgin, in Moray. Whether you’re in the middle of Thomshill or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 58 places in Moray.
Postcode districts we cover here: IV30. We regularly work on streets such as Glenlossie Road and Mannochmore and the roads around them. We also travel to Longmorn (1 mile east), Fogwatt (1 mile east), Miltonduff (2 miles north-west), Pittendreich (3 miles north-west) and Hallowood (3 miles north-east). Further out, we also cover Elgin (3 miles north), Buckie (14 miles east), Forres (11 miles west), Lossiemouth (8 miles north), Keith (14 miles east) and Burghead (9 miles north-west). Remote and island addresses take a little more planning, so call us to arrange it.
Landmarks near Thomshill
Typical jobs here are in homes near Birnie Kirk and Elgin High School and the streets around them. The closest station to Thomshill is Elgin station, roughly 3 miles north. A little further out are Elgin Museum (3.4 miles north) and Dr Gray's Hospital (3.2 miles north). Not far away are Findlay's Seat.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Also near Thomshill
Also in Thomshill
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Ask for a price
Send us a photo of the damage and one of the whole item, and tell us you’re in Thomshill, and we’ll reply with a fixed price.
Read more
What we cannot put right
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Your questions about bath re-enamelling in Thomshill
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What areas do you cover?
The whole UK, including all of Moray. Send your postcode with your photos and we will confirm dates.
How much does bath re-enamelling cost in Thomshill?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your IV30 postcode.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you cover Thomshill?
We do. We send a technician to Thomshill for every job, and the price is the same as everywhere else.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
Why Thomshill clients choose us
- One visit for most repairs
- No need to remove anything
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Read our pricing and bath cost comparison.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How to care for the repair
So the finish stays in good condition for years:
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- What kind of damage it is
- The material and finish
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- A picture taken from further back
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
