Kent · England
Bath Re-enamelling in Tilmanstone
Our repair technicians come to Tilmanstone for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Signs you need bath re-enamelling in Tilmanstone
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Most people get in touch when they notice one of these:
- An outdated colour you’d like to change
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
- Stains that will not shift
Comparing quotes
- Whether the colour is mixed to match
- Who turns up on the day
- What preparation is included
- How your room will be protected
How we handle bath re-enamelling in Tilmanstone
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s worn patches where water runs and sits and several chips and rust patches, we can normally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Tilmanstone (CT14)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Tilmanstone
Prices start from £350. You won’t pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- How hard the colour is to match
- The material and finish
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Any details about the material
Send us a photo of the damage and a wider shot of the whole item, and tell us you’re in Tilmanstone, and we will reply with a fixed price.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Towns and villages near Tilmanstone
Other services in Tilmanstone
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why us?
- We leave the room as we found it
- A year’s guarantee on all work
- A fixed quote before you book
- Honest advice, even when it means no job
Take a look at our pricing and resurfacing vs replacement cost guide.
Tilmanstone: your questions answered
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
When a repair isn’t the answer
We won’t take on work that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- A bath that’s rusted through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Tilmanstone
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
How the visit works
We begin by going over the job with you. Then the area is sheeted and masked and we start. Allow most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Ensure the room can be ventilated
Get a quote
To get a price, send two or three photos using our quote form or ring us. We will say straight away if a repair is the right fix.
Read more
Work for landlords and builders
Landlords, letting agents and housing providers in Tilmanstone use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Our work in Tilmanstone
Tilmanstone is about 4 miles west of Deal, in Kent. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Tilmanstone is one of 922 places in Kent we cover. We work right across the region, from Tilmanstone to London (about 63 miles away).
Here we cover the CT14 postcode area. Local streets include Upper Street, Vicarage Lane and Chapel Road, and we cover them all. We also travel to Elvington (2 miles west), Heronden (2 miles north), Chillenden (2 miles north-west), Barfrestone (2 miles west) and Hammill Park (3 miles north). Larger places within reach include Canterbury (10 miles north-west), Margate (12 miles north), Dover (5 miles south), Folkestone (11 miles south-west), Ramsgate (10 miles north-east) and Broadstairs (12 miles north-east).
What’s near Tilmanstone
Typical jobs here are in homes near Church of St Andrew. Tilmanstone’s nearest station is Shepherds Well station, roughly 3.3 miles south-west of the centre. Further afield, we also cover the area around Deal Castle (4.7 miles east) and Buckland Hospital (5.7 miles south).
Looking after it afterwards
So the finish stays in good condition:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
