Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Trelerw, Pembrokeshire
Damaged bath in Trelerw? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
How we handle bath re-enamelling in Trelerw
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s wear marks under the taps and an old resurfacing that’s failing, we can typically put it right, on basins & shower trays, acrylic baths and Victorian roll-tops alike.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Trelerw (SA62)
- County
- Pembrokeshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Our work in Trelerw
Trelerw is about 12 miles north-west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 223 places in Pembrokeshire.
Our visits in SA62 work the same way as everywhere else we cover. Other places close to Trelerw include Tyddewi (1 mile west), Whitchurch (2 miles north-east), Solfach (2 miles east), Pembrokeshire (2 miles north-west) and Solva (2 miles east). Within a short drive, we also cover Haverfordwest (12 miles south-east), Milford Haven (14 miles south-east), The Marsh (13 miles south-east), Fishguard (14 miles north-east), Goodwick (14 miles north-east) and Pill (14 miles south-east).
Around Trelerw
A little further out are Whitewell (1.5 miles west) and Parc y Castell (1.9 miles west). Not far away are Gewni.
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day, including clearing up.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Let us know which floor the room is on
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
Nearby places to Trelerw
Also in Trelerw
What we are called out for in Trelerw
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
If you can see any of these, send us a picture:
- An old resurfacing that is failing
- Brown or grey marks that don’t clean off
- A dull, rough surface that won’t come clean
- A roll-top that’s seen better days
Comparing quotes
- What preparation is included
- How long the guarantee is and what it covers
- Aftercare advice
- How the colour is matched
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Most jobs done in one visit
- One price list for the entire UK
- Honest advice, even when it means no job
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
Trelerw: your questions answered
How long will the bath be out of use?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
How to care for the repair
Nothing complicated is needed:
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
