Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Pembrokeshire
Bath re-enamelling across Pembrokeshire and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
Bath re-enamelling at your home in Pembrokeshire
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. Typical jobs include enamel that’s lost its shine and feels rough and lots of chips and rust spots, in cast iron baths, pressed steel baths and acrylic baths.
Every job is backed for twelve months in Pembrokeshire and everywhere else. If something goes wrong with the work, we come back.
- Area
- Pembrokeshire (SA62)
- County
- Pembrokeshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Pembrokeshire and nearby
Pembrokeshire (Welsh: Sir Benfro) is about 14 miles north-west of Haverfordwest, in Pembrokeshire. From the centre of Pembrokeshire to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 223 places in Pembrokeshire.
Postcode districts we cover here: SA62. We regularly work on streets such as Pen Rhiw, Feidr Chwech-Erw and Meidr Dwyll. Pembrokeshire sits on or near the B4583, so getting to you is simple. We also cover the places around Pembrokeshire: Tyddewi (1 mile south-east), Trelerw (2 miles south-east), Whitchurch (3 miles east), Solfach (3 miles east) and Middle Mill (3 miles east). We also work in nearby towns such as Haverfordwest (14 miles south-east), The Marsh (14 miles south-east), Fishguard (14 miles north-east), Goodwick (14 miles north-east), Hakin (15 miles south-east) and Fishguard and Goodwick (14 miles north-east).
Landmarks near Pembrokeshire
In Pembrokeshire, that means homes near St Davids Cathedral Close: The Free School, The Farmers Arms and St Non's Chapel, among other places. Further afield, we also cover the area around Whitewell (0.6 miles south) and Parc y Castell (0.6 miles south-west). Green spaces nearby include Carn Trefeiddan.
Towns and villages near Pembrokeshire
Also in Pembrokeshire
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How many areas need work
- Where the damage is and how we get to it
- The material and finish
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Any earlier repairs or coatings
Most customers in Pembrokeshire get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repair or replace in Pembrokeshire?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Pembrokeshire customers choose us
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- No extra charge for your area
- Work done at your home or business
See our prices page and bath cost comparison.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It usually takes most of the day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
Your questions about bath re-enamelling in Pembrokeshire
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Aftercare tips
To keep it looking its best for years:
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
When we would advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
