Lancashire · England

Bath re-enamelling & resurfacing in Weeton, Lancashire

Our technicians come to Weeton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Weeton?

Bath re-enamelling in Weeton, done in place

After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on acrylic baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are lots of chips and rust spots and wear marks under the taps.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Where
Weeton (PR4)
Region
Lancashire
Cover
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Getting ready for the visit

  • Clear the area around the damage
  • Open a window if you can
  • Mention any parking restrictions or tricky access

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Send pictures for a quote

Read more

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

Weeton questions

Can I add another job to the visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.

Is repairing better than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

How do I get a price for bath re-enamelling in Weeton?

Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Do the materials smell?

Expect a mild smell while we are working.

Can a failed resurfacing be redone?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

Which areas do you work in?

The whole UK, including all of Lancashire. Just include your postcode and we’ll offer you dates.

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Rinse off hair dye, oils and bath bombs right away
  • Never use suction bath mats
  • Repair dripping taps early
  • Stick to gentle, non-abrasive cleaners

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

Covering Weeton

Weeton is about 3 miles south-east of Poulton-le-Fylde, in Lancashire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover 482 places across Lancashire, from the larger towns to small villages. We work right across the region, from Weeton to Liverpool (28 miles away).

Every address in PR4 is covered. Jobs here include addresses on Church Road, Singleton Road and Minden Road and the roads around them. Main roads around Weeton include the B5260, which makes travel easy. We also travel to Mythop (1 mile south-west), Greenhalgh (1 mile east), Singleton (2 miles north), Thistleton (2 miles north-east) and Staining (2 miles west). We also work in nearby towns such as Preston (10 miles east), Lytham St Anne's (5 miles south-west), Bamber Bridge (13 miles south-east), Leyland (13 miles south-east), Fulwood (9 miles east) and Fleetwood (8 miles north-west).

Landmarks near Weeton

Around Weeton, we work in homes near The Eagle at Weeton pub, St Michael's Church and Weeton Primary School, among other places. Weeton’s nearest station is Kirkham & Wesham station, about 2.9 miles south-east of the centre. Further afield, we also cover the area around Blackpool Victoria Hospital (3.2 miles west) and Teanlowe Centre (3.2 miles north-west). For a walk, there is Marton Mere.

Map of Weeton © OpenStreetMap contributors

What a repair can’t fix

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Leaking taps or wastes (a plumber’s job)
  • A cast iron or steel bath that is cracked right through
  • Acrylic that moves when you stand in it

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

Do you need bath re-enamelling in Weeton?

Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.

Most people get in touch after spotting one of these:

  • A bath that stays dull however much you clean it
  • Chips and rust in more than one place
  • A coating lifting around the plughole
  • A coloured bath you want in white

Before you book anyone

  • Whether a trained technician does the job
  • How the room is protected while they work
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price

Choosing a repair company

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for Weeton. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Free fixed quotes from pictures
  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • Every repair guaranteed for a year

See our pricing or guide to resurfacing and replacement costs.

What affects the price in Weeton

Prices start from £350. Quotes are free and the price is fixed. What we take into account:

  • The material
  • Access to the area
  • How many areas need work
  • Any earlier repairs that need removing first

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Two or three clear photos are usually enough. It helps if you send:

  • The postcode, so we can plan the visit
  • A picture taken from further back
  • Any earlier repairs or coatings
  • One sharp close-up of the damage

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.