Lincolnshire · England
Bath re-enamelling & resurfacing in Winceby, Lincolnshire
Local bath re-enamelling for Winceby: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a full day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
Bath re-enamelling in Winceby, done in place
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with staining under the taps and around the waste and a coloured bath you want in white, we can usually put it right, whatever the material.
You get a one-year guarantee, the same in Winceby as everywhere else we work.
- Location
- Winceby (LN9)
- Area hub
- Lincolnshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Winceby
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
What areas do you cover?
We work UK-wide, so Winceby is covered. Prices don’t change with location.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How much does bath re-enamelling cost in Winceby?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
What happens after I send pictures?
We come back with a fixed quote. There’s no obligation to book.
Are there extra charges for Winceby?
We do not add a call-out fee. Your fixed price includes everything.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What we are called out for in Winceby
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
People usually call us after spotting something like this:
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
- An outdated colour you’d like to change
What to look for in a quote
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Who will actually do the work
Towns and villages near Winceby
What else we do in Winceby
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Winceby. The price reflects:
- The type of damage
- Access to the area
- Unusual colours or finishes
- Doing more than one item at once
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A coin beside the damage so we can judge size
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Our work in Winceby
Winceby is about 12 miles south of Louth, in Lincolnshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We work in all 732 towns and villages across Lincolnshire. Our nearest city page is Leeds, about 76 miles away.
We cover every part of the LN9 postcode area and the streets around it. Nearby, we also work in Lusby (1 mile east), Asgarby (1 mile south-east), Hareby (2 miles south-east), Old Bolingbroke (3 miles south-east) and Moorby (3 miles south-west). Further out, we also cover Boston (15 miles south), Louth (12 miles north), Skegness (15 miles east), Horncastle (4 miles west), Mablethorpe (15 miles north-east) and Woodhall Spa (9 miles west).
What’s near Winceby
Locally, our jobs take us to homes close to St Margaret. A little further out are Horncastle (3.8 miles west) and War Memorial Hospital (3.8 miles west). For a walk, there is Thornbury Hill.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
