Shropshire · England
Bath Re-enamelling in Worthen
Full bath re-enamelling and resurfacing at your home in Worthen, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that’s seen better days
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
How we handle bath re-enamelling in Worthen
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Common call-outs are for an old resurfacing that’s failing and a dull, rough surface that won’t come clean, on basins & shower trays, Victorian roll-tops and cast iron baths.
Big or small, you get the same one-year guarantee in Worthen and across Shropshire.
- Location
- Worthen (SY5)
- County
- Shropshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Worthen
What else we do in Worthen
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- We leave the room as we found it
- Colour-matched on site
- No need to remove anything
- We’ll tell you if it’s not worth repairing
See our full price list and bath cost comparison.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A wider photo showing the whole bath
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Landlords, agents and businesses in Worthen
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Worthen use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Worthen questions
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
Do you cover the entire of Shropshire?
We cover the whole UK, including Worthen and the rest of Shropshire. Send your postcode with your photos and we’ll confirm dates.
How do I get a price for bath re-enamelling in Worthen?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
Signs you need bath re-enamelling in Worthen
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Contact us if you’ve noticed:
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Comparing quotes
- A fixed quote, and whether VAT is included
- Whether the price covers travel
- Whether a trained technician does the job
- How to look after the finish
Keeping it looking good
Nothing complicated is needed:
- Rinse off hair dye, oils and bath bombs immediately
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Worthen and the surrounding area
Worthen is about 12 miles south-west of Shrewsbury, in Shropshire. Whether you are in the middle of Worthen or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Worthen is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 48 miles away.
All of SY5 is covered. Nearby, we also work in Pentirvin (2 miles south), Bentlawnt (2 miles south), Hopesgate (2 miles south-east), Westley (3 miles north-east) and Horsebridge (3 miles east). We also work in nearby towns such as Shrewsbury (12 miles north-east), Coleham (11 miles north-east), Kingsland (11 miles north-east), Belle Vue (11 miles north-east), Monkmoor (13 miles north-east) and Bagley (12 miles north-east).
Near you in Worthen
Around Worthen, we work in homes near Church of All Saints and Long Mountain CofE Primary School and the streets around them. Well-known places in the area include Aston Rogers Pond House (1.6 miles north-east). Not far away are Long Mountain.
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Clear the area around the damage
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
