Isle of Anglesey · Wales
Bath Repair for Aberffraw homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Aberffraw, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
Landlords, agents and businesses in Aberffraw
If you manage property in Aberffraw, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
We work for landlords, letting agents and housing providers in Aberffraw as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Bath repair at your home in Aberffraw
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. If you are dealing with chips under the taps and chips caused by builders, we can help, on acrylic, roll-top & freestanding and cast iron enamel alike.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Aberffraw (LL63)
- County
- Isle of Anglesey
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. We charge the same across the UK, including Aberffraw. What changes the price is:
- Doing more than one item at once
- How much damage there is
- Previous DIY repairs that have to come out
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Aberffraw. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- Something in shot to show the size
- What it’s made of, if you know
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
When we would advise against a repair
It helps to know what we can’t do:
- Rust that has eaten right through a steel bath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Let us know which floor the room is on
- Open a window if you can
- Let the surface dry out before the visit
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Read more
Also near Aberffraw
What else we do in Aberffraw
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- No need to remove anything
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
See our full price list or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Keeping it looking good
It’s all simple stuff:
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you are working above it
- Store metal items away from the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Aberffraw questions
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How long does the repair take to cure?
Most baths can be used the day after. We’ll tell you the exact curing time when we finish.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Do you need bath repair in Aberffraw?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Look out for any of the following:
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
- A failed DIY repair that is discoloured or lifting
- Scratches you can feel with a fingernail
What to look for in a quote
- What prep work is covered
- How to care for the finish
- A fixed price, and whether VAT is included
- How long it needs to cure
Where we work around Aberffraw
Aberffraw is about 11 miles south-east of Holyhead, in Isle of Anglesey. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Aberffraw is one of 115 places in Isle of Anglesey we cover. You can also see our page for Liverpool, about 65 miles away.
We cover every part of the LL63 postcode area. Streets in the area include Church Street, Stryd y Bangor and Glan-y-Mor. We also travel to Bryn Du (3 miles north), Bethel (3 miles north-east), Llanfaelog (3 miles north-west), Malltraeth (3 miles east) and Rhosneigr (3 miles north-west). We also work in nearby towns such as Holyhead (11 miles north-west), Blackbridge (10 miles north-west), Porth-y-Felin (11 miles north-west), Llangefni (8 miles north-east), Menai Bridge (12 miles east) and Stryd (11 miles north-west).
Local landmarks in Aberffraw
Locally, our jobs take us to homes close to The Crown pub and St Beuno's Church. The nearest railway station is Bodorgan station, roughly 2.2 miles north-east of the centre. A little further out are Aberffraw llys and Motte (within half a mile north). The countryside around Aberffraw includes Llyn Coron.
About our accreditations · Every repair comes with a one-year guarantee.
