Isle of Anglesey · Wales
Bath Repair for Malltraeth homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Malltraeth. Free, fixed quotes from your pictures.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
Malltraeth: your questions answered
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Bath repair in Malltraeth without replacing anything
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We’re frequently asked to fix chips along the edge of the bath and scuffs and scratches in the surface, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Malltraeth (LL62)
- County
- Isle of Anglesey
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
We would rather lose a job than do one that won’t last, so these are the limits:
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Signs you need bath repair in Malltraeth
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.
Keep an eye out for any of the following:
- Rust by the waste and overflow
- A chipped rim or side
- A kit repair that didn’t last
- Holes from dropped items
Comparing quotes
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- How your room will be protected
- Whether a trained technician does the job
Places near Malltraeth
What else we do in Malltraeth
Keeping it looking good
Aftercare is simple:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
- Cover the bath during DIY or decorating
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
About Malltraeth
Malltraeth is about 11 miles west of Bangor, in Isle of Anglesey. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Malltraeth is one of 115 towns and villages in Isle of Anglesey where we work. Our nearest city page is Liverpool, about 62 miles away.
All of LL62 is covered, from the main roads to the quietest streets. Local streets include High Street, David Street and The Drive, and we cover them all. Main roads around Malltraeth include the A4080, which makes travel easy. If you are just outside Malltraeth, we cover Bethel (1 mile north-west), Newborough (2 miles south-east), Llangaffo (2 miles east), Llangeinwen (3 miles south-east) and Pen-Lôn (3 miles south-east). Larger places within reach include Holyhead (13 miles north-west), Blackbridge (13 miles north-west), Porth-y-Felin (13 miles north-west), Llangefni (5 miles north-east), Menai Bridge (9 miles east) and Stryd (13 miles north-west).
Around Malltraeth
In Malltraeth, that means homes near St Beuno's Church, Royal Oak pub and Ysgol Gymuned Bodorgan. The closest station to Malltraeth is Bodorgan station, about 1.4 miles north-west of the centre. Nearby you’ll also find Aberffraw llys and Motte (3.2 miles west) and Cefni Hospital (5.6 miles north-east). Open spaces near Malltraeth include Cefncwmwd and Llyn Coron.
- Parks and local facilities nearby include Clynnog Fechan (2.7 miles south-east)
Landlord and trade work in Malltraeth
Housing associations and facilities teams use us for planned and reactive repairs in Isle of Anglesey and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Malltraeth. What changes the price is:
- How easy the damage is to reach
- The material and finish
- The type of damage
- Unusual colours or finishes
Our prices are the same across the UK, with no extra for Malltraeth. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
Ask for a price
Upload photos of the damage and one of the whole item, and tell us you’re in Malltraeth, and we will come back with a fixed quote.
Advice
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
