Pembrokeshire · Wales
Bath chip & crack repair in Angle, Pembrokeshire
We travel to Angle for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chip where the taps sit
Bath repair at your home in Angle
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We are often asked to fix rust by the waste and overflow and hairline or through cracks in acrylic, on pressed steel enamel, cast iron enamel and acrylic.
All of our repairs are guaranteed for twelve months in Angle and everywhere else. We return to put right any problem with the work.
- Location
- Angle (SA71)
- County
- Pembrokeshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Angle: your questions answered
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
What does bath repair cost?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What happens after I send pictures?
We review the photos and send a fixed quote.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you repair a hole in a bath?
Normally. Photos of the hole and the underside help us check.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Make sure the area is dry
- Let us know about parking or access
- Keep pets and children out of the room while we work
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
Read more
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Repair or replace in Angle?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Angle
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- One-year guarantee on every repair
- Most jobs done in one visit
Read our pricing or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we’re called out for in Angle
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
If you can see any of these, send us a photo:
- A failed DIY repair that’s discoloured or lifting
- A hole punched through by something heavy
- Rusty patches near the plughole
- Snagging damage from a refit
Questions to ask before booking
- How changes to the job are handled
- How the room is protected while they work
- When it can be used again
- The length of the guarantee and what it covers
How to care for the repair
Simple care helps the repair last. We recommend:
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- Don’t leave a fresh chip for long
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Our work in Angle
Angle is about 3 miles south-west of Milford Haven, in Pembrokeshire. From the centre of Angle to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Angle is one of 223 towns and villages in Pembrokeshire we cover.
Jobs in SA71 work the same way as everywhere else we cover. Whether you live on Shirburn Close and West Bay Close or a nearby road, a technician can come to you. We also cover the places around Angle: Gellyswick (2 miles north-east), Rhoscrowther (3 miles east), Hubberston (3 miles north-east), Hakin (3 miles north-east) and Haven's Head (3 miles north-east). We also work in nearby towns such as Haverfordwest (10 miles north-east), Milford Haven (3 miles north-east), Pembroke (8 miles east), Pembroke Dock (6 miles east), The Marsh (10 miles north-east) and Green (8 miles east).
Local landmarks in Angle
Locally, our jobs take us to homes close to Hibernia Inn and Church of St Mary, among other places. The closest station to Angle is Milford Haven station, roughly 3 miles north-east of the centre. Other landmarks nearby include North Hill (within half a mile north) and South Pembrokeshire Hospital (5.8 miles east). Open spaces near Angle include Hubberstown Pill and North Hill.
What we cannot put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Towns and villages near Angle
More services for Angle
About our accreditations · Every repair comes with a one-year guarantee.
