Bristol · England

Bath chip & crack repair in Bower Ashton, Bristol

Damaged bath in Bower Ashton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Rust spots around the plughole
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Bower Ashton homes

Bath repair in Bower Ashton without replacing anything

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on pressed steel enamel, whirlpool & spa baths and acrylic, and common reasons people contact us are chips caused by builders and a chipped rim or side.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.

Location
Bower Ashton (BS3, BS1, BS41)
Area hub
Bristol
Cover
A year, on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Our work in Bower Ashton

Bower Ashton is about 1 mile west of Ashton Gate, in Bristol. Wherever you are in the BS3 postcode area, we come to you. We work in all 89 towns and villages across Bristol, from the larger towns to small villages. You can also see our page for Birmingham, about 78 miles away.

Postcode districts we cover here: BS3, BS1 and BS41. Local streets include Marsh Road, Ashton Road and Clanage Road. Main roads around Bower Ashton include the A369, so getting to you is simple. Close by, we cover Ashton Gate (1 mile east), Ashton Vale (1 mile south-east), Hotwells (1 mile north-east), Leigh Woods (1 mile north) and The Chessels (1 mile east). Larger places within reach include Montpelier (3 miles north-east), Easton (3 miles north-east), Whitehall (4 miles north-east), Redfield (3 miles east), St Pauls (3 miles north-east) and Baptist Mills (3 miles north-east).

What’s near Bower Ashton

Around Bower Ashton, we work in homes near Ashton Vale Primary School, Greville Smyth Park and Ashton Park School, among other places. Also close by are Nova Scotia pub (0.6 miles north-east) and Saint Francis Church (0.7 miles east). For rail, the closest station is Parson Street station, about 1.1 miles south-east. A little further out are St Bartholomew's Hospital (1.8 miles north-east) and Bristol Castle (2 miles north-east). Green spaces nearby include Brandon Hill and Tarn Lake.

  • Local facilities include Avon (2.1 miles east)
Map of Bower Ashton © OpenStreetMap contributors

What affects the price in Bower Ashton

Prices start from £95. You will know the full cost before you book. We look at:

  • What the surface is made of
  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • The material, if you know it
  • Natural light rather than flash
  • Your postcode, so we can check dates
  • A wider photo showing the entire bath

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

How it works

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Open a window if you can
  • Tell us about parking, stairs or access

How to get a price

Upload a photo of the damage and a wider shot of the entire item, and tell us you are in Bower Ashton, and we’ll reply with a fixed price.

Get a free quote

Read more

How to look after the repair

It’s all simple stuff, just a few sensible habits:

  • Give the bath a quick rinse after use
  • Don’t scrub with anything abrasive
  • Fix dripping taps early to stop staining and limescale
  • Stick to mild cleaners and a soft cloth

A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

Questions from Bower Ashton

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

How do I get a price for bath repair in Bower Ashton?

Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your BS3 postcode.

How long does the repair take to cure?

Normally by the following day, though it depends on what we’ve done.

What happens after I send photos?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including pastel and older colours.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Something went through my bath. Can it be fixed?

Normally. Send us a photo of the hole and one from under the bath if you can.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Do you need bath repair in Bower Ashton?

A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.

Common reasons people in Bower Ashton contact us are:

  • Rusty patches near the plughole
  • Scuffs and scratches in the surface
  • A chipped rim or side
  • A hole punched through by something heavy

Before booking anyone

  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • How long it needs to cure
  • What happens if the damage is worse than the photos show

Choosing a repair company

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

When a repair is not the answer

A repair is not right for every job, for example:

  • Flexing caused by a failed cradle or loose feet
  • Cracks in parts of an acrylic bath we cannot get to from below
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send photos and we will say what we think.

Materials we work on in Bower Ashton

  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.