Bristol · England

Bath chip & crack repair in St Pauls, Bristol

Local bath repair for St Pauls: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in St Pauls

St Pauls: your questions answered

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Which areas do you work in?

Across the UK, and that includes St Pauls. Our prices are the same everywhere.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is a holed acrylic bath repairable?

Usually. Photos of the hole and the underside help us check.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

What happens after I send photos?

You will get a fixed quote back. You are under no obligation.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Bath repair in St Pauls, done in place

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you’re dealing with scuffs and scratches in the surface and a hole punched through by something heavy, we can normally put it right.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Area
St Pauls (BS2, BS6, BS1)
Region
Bristol
Guarantee
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Our work in St Pauls

St Pauls is about 1 mile north-east of Bristol, in Bristol. Jobs in St Pauls are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. St Pauls is one of 89 towns and villages in Bristol we cover. You can also see our page for Birmingham, about 75 miles away.

Every address in BS2, BS6 and BS1 is covered, from the main roads to the quietest streets. Jobs here include addresses on Dove Lane, City Road and York Road and the roads around them. Main roads around St Pauls include the A4032, which makes travel easy. Close by, we cover Montpelier (1 mile north-west), Baptist Mills (1 mile east), St Werburghs (1 mile north-east), St Jude's (1 mile south) and Bristol (1 mile south-west). We also work in nearby towns such as Soundwell (3 miles east), Mayfield Park (3 miles east), Hartcliffe (4 miles south), Staple Hill (4 miles east), Brentry (3 miles north) and Sea Mills (3 miles north-west).

What’s near St Pauls

Our customers here include homes close to Church of St Agnes with St Simon, North Bristol Post 16 Centre and Montpelier High School. You’ll also find St Barnabas Church of England VC Primary School (within half a mile north-east), Riverside Park (within half a mile south-east) and Prince Of Wales Public House (under half a mile east). St Pauls has its own railway station: Montpelier station. Nearby you’ll also find Bristol Castle (0.7 miles south) and Palestine Museum and Cultural Centre Bristol (0.9 miles south-west). Not far away are Tarn Lake and Brandon Hill.

  • Parks and local facilities nearby include Avon (1.1 miles south)
Map of St Pauls © OpenStreetMap contributors

Landlords, agents and businesses in St Pauls

If you manage property in St Pauls, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair won’t do:

  • Cracks in acrylic we cannot reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Water coming from the waste or taps rather than the bath

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in St Pauls

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic

Repair or replace: which is better?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why choose Surface Doctor in St Pauls

  • Colour-matched on site
  • Nothing taken out or refitted
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work

Take a look at our full price list or resurfacing vs replacement cost guide.

What we are called out for in St Pauls

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Typical reasons for a call-out include:

  • A kit repair that didn’t last
  • A cracked acrylic bath
  • Chips along the edge of the bath
  • Impact holes in acrylic

Comparing quotes

  • Whether the price is fixed and includes VAT
  • Who turns up on the day
  • How changes to the job are handled
  • What prep work is covered

How to compare quotes

What happens on the day

The work is clean and fairly quiet. Protection goes down first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the next day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Keep children and pets away from the room on the day
  • Have somewhere for us to park nearby if possible

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.

Get a free quote

Related advice

Prices and what affects them

Prices start from £95. Prices are worked out job by job. What matters most is:

  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • What the surface is made of
  • How many areas need work

There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your photos

Two or three clear pictures are usually enough. Try to include:

  • Details of any past repairs
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus

If you are in St Pauls and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Aftercare tips

Good habits make a big difference to how long a repair lasts:

  • Get a dripping tap fixed promptly
  • Give the bath a quick rinse after use
  • Clean with warm water and a mild detergent
  • Ensure an acrylic bath is firm underfoot

A repaired bath needs no special treatment. Skip bleach and gritty creams.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.