Nottingham · England
Bath chip & crack repair in Bunny, Nottingham
Damaged bath in Bunny? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
Honest limits
Some jobs are not right for a repair, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Bath repair at your home in Bunny
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can normally use the bath the next day. Typical jobs include rusty patches near the plughole and cracks in an acrylic bath, on pressed steel enamel, cast iron enamel and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Bunny (NG11)
- County
- Nottingham
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours, depending on the damage from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Places near Bunny
Also in Bunny
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Bunny use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Questions from Bunny
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
How do I get a price for bath repair in Bunny?
Prices start from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you cover Bunny?
We do. Repair technicians travel to Bunny from across the region, with no extra charge for travel.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Bunny and nearby
Bunny is about 3 miles south-east of Clifton, in Nottingham. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We cover all 51 towns and villages in Nottingham, from the larger towns to small villages. Our nearest city page is Birmingham, about 42 miles away.
We cover every part of NG11. That includes homes on Loughborough Road, Albert Road and Victoria Road. Neighbouring places we cover include Bradmore (1 mile north), Wysall (2 miles south-east), Ruddington (2 miles north), Costock (2 miles south) and Thorpe in the Glebe (3 miles south-east). Larger places within reach include Nottingham (7 miles north), Arnold (9 miles north), Bulwell (10 miles north), Sneinton (6 miles north), St Ann's (7 miles north) and Clifton (3 miles north-west).
Near you in Bunny
Around Bunny, we work in homes near Bunny CofE Primary School, St Mary's Church and The Rancliffe Arms. Nearby you will also find Ruddington Village Museum (2.1 miles north) and Basford Rural District (2.6 miles north). For a walk, there is Wilford Hill and Wilwell Farm Nature Reserve.
Do you need bath repair in Bunny?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- Impact holes in acrylic
- Rust spots around the plughole
- Damage beneath the taps
- Chips caused by builders
Before you book anyone
- What prep work is covered
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- How soon you can use it again
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Should you replace it?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Typically one visit, start to finish
See our prices page or bath cost comparison.
How we price bath repair
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- What kind of damage it is
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Doing more than one item at once
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any earlier repairs or coatings
- Natural light rather than flash
- Any details about the material
- Your postcode, so we can check dates
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
