Wiltshire · England
Bath Repair for Charlton Heath homes
Bath repair for Charlton Heath, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Snagging damage from a refit
- Damage beneath the taps
Charlton Heath questions
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you quote from photos?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
About our bath repair in Charlton Heath
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. We are frequently asked to fix cracks in an acrylic bath and a chipped rim or side, across cast iron enamel, pressed steel enamel and roll-top & freestanding.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Charlton Heath (SN16)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Charlton Heath
Other services in Charlton Heath
Common problems we fix in Charlton Heath
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
These are the problems we’re asked about most:
- A failed DIY repair that is discoloured or lifting
- A chipped rim or side
- A cracked acrylic bath
- Rusty patches near the plughole
What your quote should include
- What aftercare is recommended
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Looking after it afterwards
How the surface is treated afterwards matters:
- Ensure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
- Do not leave a fresh chip for long
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Charlton Heath and nearby
Charlton Heath is about 8 miles south of Cirencester, in Wiltshire. Jobs in Charlton Heath are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We cover all 425 towns and villages in Wiltshire. Our jobs stretch from Charlton Heath to Birmingham (61 miles away).
We work across SN16 and the streets around it. If you’re just outside Charlton Heath, we cover Charlton (1 mile west), Lea (2 miles south-west), Milbourne (2 miles west), Little Somerford (3 miles south) and Malmesbury (3 miles west). Within a short drive, we also cover Chippenham (10 miles south), Calne (11 miles south), Corsham (14 miles south-west), Hardenhuish (10 miles south-west), Lyneham (7 miles south-east) and Pewsham (11 miles south).
Near you in Charlton Heath
In Charlton Heath, that means homes near Church of All Saints, among other places. Nearby you will also find Malmesbury Castle (2.9 miles west) and Athelstan Museum (2.8 miles west). Not far away are Clattinger Farm.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- How many items we do on one visit
- Unusual colours or finishes
- How many areas need work
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The material, if you know it
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Get a quote
To get a price, send two or three photos through our quote form or ring us. We’ll say right away if a repair is the right fix.
Read more
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
