Wiltshire · England
Bath chip & crack repair in Charlton, Wiltshire
Problem with your bath in Charlton? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- A chip where the taps sit
Looking after it afterwards
Nothing complicated is needed:
- Do not scrub with anything abrasive
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Ensure an acrylic bath is firm underfoot
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Bath repair in Charlton, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We work on whirlpool & spa baths, roll-top & freestanding and acrylic, and common reasons people get in touch are a kit repair that didn’t last and rusty patches near the plughole.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Charlton (SN16)
- Area hub
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Charlton
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
- Keep a parking space free if you can
Ask for a price
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Charlton, and we will reply with a fixed quote.
Related advice
What bath repair costs
Prices start from £95. We price every job individually, from your pictures. The main factors are:
- How much damage there is
- Where the damage is and how we get to it
- Unusual colours or finishes
- The material and finish
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Whether it’s been repaired or coated before
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly before booking.
Materials we work on in Charlton
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Charlton and the surrounding area
Charlton is about 9 miles south-west of Cirencester, in Wiltshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 425 places in Wiltshire. You can also see our page for Birmingham, about 61 miles away.
All of SN16 is covered. Whether you live on St John's Way and Park Street or anywhere nearby, a technician can come to you. We also cover the places around Charlton: Charlton Heath (1 mile east), Milbourne (1 mile south-west), Lea (2 miles south), Malmesbury (2 miles south-west) and Little Somerford (3 miles south). Larger places within reach include Chippenham (10 miles south), Calne (11 miles south), Corsham (13 miles south-west), Hardenhuish (10 miles south), Lyneham (8 miles south-east) and Pewsham (11 miles south).
What’s near Charlton
Typical jobs here are in homes near Malmesbury Church of England School and Music Academy and Church of St John the Baptist and the streets around them. A little further out are Malmesbury Castle (2 miles south-west) and Tetbury Hospital (4.8 miles north-west). The countryside around Charlton includes Clattinger Farm.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Common problems we fix in Charlton
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- A chipped rim or side
- Holes from dropped items
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
Comparing quotes
- What preparation is included
- How soon you can use it again
- What happens if the damage is worse than the photos show
- How to look after the finish
Questions from Charlton
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Places near Charlton
More services for Charlton
About our accreditations · Every repair comes with a one-year guarantee.
