Greater Manchester · England
Bath chip & crack repair in Clayton, Greater Manchester
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Clayton, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- Chips on the rim or sides

About our bath repair in Clayton
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Whether it’s chips on the rim or sides and scratches you can feel with a fingernail, we can normally put it right, on cast iron enamel, roll-top & freestanding and acrylic alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

- Where
- Clayton (M11, M40, M43)
- Region
- Greater Manchester
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Clayton
Clayton is about 2 miles east of Manchester, in Greater Manchester. Customers in Clayton get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We cover 72 places in Greater Manchester.
Here we cover the M11, M40 and M43 postcode area. From Edge Lane, North Road and Halton Road or a nearby road, a technician can come to you. You will find Clayton on the A662, which makes it straightforward to reach. If you are just outside Clayton, we cover Bradford (1 mile south-west), Openshaw (1 mile south), Droylsden (1 mile east), Fairfield (1 mile south-east) and Belle Vue (1 mile south). Larger places within reach include Wythenshawe (8 miles south-west), Old Trafford (4 miles south-west), Chinatown (3 miles west), Broughton (3 miles west), Butler Green (3 miles north-east) and Heaton Norris (5 miles south).
What’s near Clayton
Typical jobs here are in homes near Connell Coop College, Philips Park and Church of St Cross and the streets around them. Other local landmarks include St Willibrord's RC Primary School (within half a mile north) and Clayton Conservative Club pub (within half a mile south). For rail, the closest station is Ashburys station, roughly 1.2 miles south-west. A little further out are Clayton Hall Living History Museum (within half a mile south-west) and Manchester Castle (2.6 miles west). The countryside around Clayton includes Unicorn Grocery and Boating lake.
- Other local spots include Droylsden West (1 mile east)
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Repairing versus replacing in Clayton
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Clayton. The job itself decides the price: the material, the amount of damage and how many items.
Why Clayton clients choose us
- Fixed prices from your photos
- Most jobs done in one visit
- Rooms protected and left tidy
- No extra charge for your area
Read our pricing or bath cost comparison.
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
How to look after the repair
So the finish stays in good condition for years:
- If an acrylic bath flexes, have its feet adjusted
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
- Wear across the whole surface, which needs re-enamelling
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Clayton
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Towns and villages near Clayton
What else we do in Clayton
FAQs for Clayton
How much does bath repair cost in Clayton?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
How long before I can use the bath?
Usually within a day, though it depends on what we’ve done.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Common problems we fix in Clayton
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Send us a picture if you notice any of these:
- A hole punched through by something heavy
- Chips along the edge of the bath
- A kit repair that didn’t last
- Snagging damage from a refit
Comparing quotes
- What prep work is covered
- How soon you can use it again
- Who turns up on the day
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.

