Glasgow · Scotland
Bath Repair for Crookston homes
Bath repair in Crookston without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Chips on the rim or sides
- Rust spots around the plughole
Bath repair at your home in Crookston
A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. Whether it’s cracks in an acrylic bath and damage beneath the taps, we can normally put it right.
Whatever the size of the job, you get the same one-year guarantee in Crookston and across Glasgow.
- Location
- Crookston (G52, PA1, G53)
- County
- Glasgow
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Crookston and the surrounding area
Crookston is about 2 miles south of Renfrew, in Glasgow. Jobs in Crookston are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in 183 places across Glasgow, from the larger towns to small villages.
All of G52, PA1 and G53 is within our area, from the main roads to the quietest streets. Local streets include Moulin Road, Glasgow Road and Newnham Road. Being close to the A736, Crookston is easy for our repair technicians to reach. If you’re just outside Crookston, we cover Rosshall (1 mile south-east), Hillington (1 mile north-east), Penilee (1 mile north), Cardonald (1 mile north-east) and Hawkhead (1 mile south-west). Larger places within reach include Glasgow (4 miles east), Hillhead (4 miles north-east), Dowanhill (4 miles north-east), Woodlands (4 miles north-east), Woodside (4 miles north-east) and North Kelvinside (4 miles north-east).
Near you in Crookston
Around Crookston, we work in homes near Barshaw Park, Rosshall Academy and Paisley, among other places. There’s a railway station in Crookston itself: Crookston station. Well-known places in the area include Leverndale Hospital (0.6 miles south) and Silverburn Shopping Centre (1.8 miles south-east).
Also near Crookston
What else we do in Crookston
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Fixed prices from your photos
- CHAS and Constructionline accredited
- No extra charge for your area
- Straight answers about what a repair can do
Take a look at our pricing or bath cost comparison.
Your questions about bath repair in Crookston
Do you come to Crookston?
Yes. We work across the UK and come to Crookston. Send photos and we’ll quote, or call 0345 017 0787.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Which areas do you work in?
The entire UK, including all of Glasgow. Send your postcode with your pictures and we’ll offer you dates.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Keeping it looking good
So the finish stays in good condition for years:
- Do not leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair will not do:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
Send us photos and we will tell you honestly before you book.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Before we arrive
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
How we price bath repair
Repairs from £95. You will know the full cost before booking. We look at:
- How much damage there is
- Whether we combine several jobs
- Where the damage is and how we get to it
- The type of damage
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Common problems we fix in Crookston
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Look out for these signs:
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
Comparing quotes
- Whether a trained technician does the job
- When it can be used again
- Whether the price is fixed and includes VAT
- If travel is included in the price
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
