Derbyshire · England
Bath Repair in Findern
Our repair technicians come to Findern for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- A kit repair that didn’t last
About our bath repair in Findern
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We are frequently asked to fix scratches you can feel with a fingernail and chips under the taps, in whirlpool & spa baths, pressed steel enamel and acrylic.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Findern (DE65)
- Area hub
- Derbyshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Findern
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do you cover Findern?
Yes. We work across the UK and come to Findern and the rest of Derbyshire. Send pictures and we will quote, or call 0345 017 0787.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Repair or replace in Findern?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- CHAS and Constructionline accredited
- One visit for most repairs
- We come to you, anywhere in the UK
- A fixed quote before booking
Take a look at our prices page and bath cost comparison.
Also in Findern
Signs you need bath repair in Findern
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Customers normally contact us about:
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- Chips under the taps
- A failed DIY repair that is discoloured or lifting
What to look for in a quote
- Who will actually do the work
- How soon you can use it again
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
Covering Findern
Findern is about 4 miles south-west of Derby, in Derbyshire. Whether you are in the middle of Findern or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 532 places across Derbyshire, from the larger towns to small villages. You can also see our page for Birmingham, about 31 miles away.
Every address in DE65 is covered, from the main roads to the quietest streets. Local streets include Main Street, Hawthorn Crescent and Mill Close, all of which we cover. We also cover the places around Findern: Stenson (1 mile east), Willington (2 miles south-west), Burnaston (2 miles north-west), Twyford (2 miles south-east) and Etwall (2 miles west). We also work in nearby towns such as Swadlincote (7 miles south), Ilkeston (12 miles north-east), Long Eaton (11 miles east), Belper (11 miles north), Heanor (13 miles north-east) and Ripley (14 miles north-east).
Local landmarks in Findern
Locally, our jobs take us to homes close to Derby Pride Academy, Church of All Saints and Findern Primary School. For rail, the closest station is Willington station, roughly 1.5 miles south-west of the centre. A little further out are Mackworth Castle (4.5 miles north) and Repton School Museum (2.2 miles south).
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Findern
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- The material and finish
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Upload a photo of the damage and one of the entire item, and tell us you are in Findern, and we will come back with a fixed quote.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
How it works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the next day, the bath is ready to use.
How to prepare
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we’ll tell you honestly.
Materials we work on in Findern
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
