Isle of Anglesey · Wales
Bath Repair for Gors homes
Bath repair for Gors, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
How we handle bath repair in Gors
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s an old repair that has yellowed or come loose and rusty patches near the plughole, we can typically put it right.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Area
- Gors (LL65)
- Area hub
- Isle of Anglesey
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Aftercare is simple:
- Keep metal cans and razors off the surface
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we repair
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Let us know which floor the room is on
Get a quote
Upload photos of the damage and a wider shot of the whole item, and tell us you’re in Gors, and we will reply with a fixed price.
Related advice
Nearby places to Gors
Other services in Gors
What we are called out for in Gors
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Keep an eye out for any of the following:
- A chip where the taps sit
- Scuffs and scratches in the surface
- Chips caused by builders
- Impact holes in acrylic
What to look for in a quote
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
- Who will actually do the work
Repair or replace in Gors?
People frequently assume a cracked or chipped bath has to come out. Generally it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why Gors clients choose us
- Everything repaired in place
- Dust sheets down, tidy finish
- A fixed quote before booking
- Technicians who travel to you, UK-wide
See our pricing and bath cost comparison.
Gors and the surrounding area
Gors is about 1 mile west of Holyhead, in Isle of Anglesey. Our repair technicians come to homes and businesses in Gors and the surrounding area, so nothing has to leave your home. Gors is one of 115 places in Isle of Anglesey we cover. Our jobs stretch from Gors to Liverpool (72 miles away).
Our visits in LL65 are booked in the same way as anywhere else. We regularly work on streets such as South Stack Road and Hirfron. Close by, we cover Llaingoch (1 mile north), Pentre Pella (1 mile north), Pont-Hwfa (1 mile north-east), Stryd (1 mile east) and Soldiers Point (1 mile north-east). Within a short drive, we also cover Llangefni (15 miles east), Amlwch (15 miles north-east), Valley (4 miles east), Rhosneigr (8 miles south-east), Pencraig (15 miles east) and Cemaes (11 miles north-east).
Landmarks near Gors
In Gors, that means homes near Y Ddraig Goch pub, St Seiriol's Church and Breakwater Country Park. For rail, the closest station is Holyhead station, about 1.3 miles east of the centre. A little further out are Caer Gybi (1.3 miles east) and Stanley Sailors' Hospital (1.4 miles east). Green spaces nearby include South Stack Cliffs RSPB reserve and Tre-wilmot.
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- How hard the colour is to match
- What the surface is made of
- How much damage there is
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Your questions about bath repair in Gors
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
How much does bath repair cost in Gors?
Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your LL65 postcode.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Do you cover Gors?
We do. Repair technicians travel to Gors from across the region, and the price is the same as everywhere else.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
