Isle of Anglesey · Wales
Bath Repair for Llaingoch homes
Our repair technicians come to Llaingoch for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Deep scratches in acrylic
About our bath repair in Llaingoch
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. There’s no need to book a plumber or tiler, because the bath does not move. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are holes from dropped items and a cracked acrylic bath.
You get a one-year guarantee, the same in Llaingoch as everywhere else we work.
- Area
- Llaingoch (LL65)
- County
- Isle of Anglesey
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Llaingoch
Llaingoch is about 1 mile west of Holyhead, in Isle of Anglesey. From the centre of Llaingoch to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 115 places in Isle of Anglesey, from the larger towns to small villages. Our jobs stretch from Llaingoch to Liverpool (about 72 miles away).
Jobs in LL65 work the same way as everywhere else we cover. Other places close to Llaingoch include Pentre Pella (1 mile north-east), Gors (1 mile south), Pont-Hwfa (1 mile east), Soldiers Point (1 mile north-east) and Stryd (1 mile east). Further out, we also cover Llangefni (15 miles east), Amlwch (15 miles north-east), Valley (4 miles east), Rhosneigr (8 miles south-east), Trearddur (3 miles south-east) and Cemaes (11 miles north-east).
Local landmarks in Llaingoch
Typical jobs here are in homes near Breakwater Country Park, Y Ddraig Goch pub and St Seiriol's Church. Llaingoch’s nearest station is Holyhead station, roughly 1.5 miles east of the centre. A little further out are Caer Gybi (1.4 miles east) and Stanley Sailors' Hospital (1.5 miles east). The countryside around Llaingoch includes Holyhead Mountain and South Stack Cliffs RSPB reserve.
The process
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Before we arrive
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
Repair or replace: which is better?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Same prices wherever you are
- We come to you, anywhere in the UK
- A fixed quote before you book
- We leave the room as we found it
See our pricing or bath cost comparison.
FAQs for Llaingoch
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Honest limits
To be straight with you, some problems need a different fix:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
How to look after the repair
Once the work has cured, treat it gently:
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Make sure an acrylic bath is firm underfoot
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Also near Llaingoch
Other services in Llaingoch
What we’re called out for in Llaingoch
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for these signs:
- Damage beneath the taps
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Questions to ask before booking
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- How changes to the job are handled
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Prices and what affects them
Prices start from £95. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- The material and finish
- What kind of damage it is
- Doing more than one item at once
We charge the same wherever you are, so there’s no premium for Llaingoch. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Where you are, by postcode
- A close-up of the damage, in focus
- The material, if you know it
- Something in shot to show the size
If you are in Llaingoch and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
