Blackpool · England
Bath Repair in Great Marton
Chip and crack repairs to enamel, acrylic and cast iron baths in Great Marton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Impact holes in acrylic
- Rusty patches near the plughole
Bath repair in Great Marton, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are rust by the waste and overflow and a failed DIY repair that’s discoloured or lifting.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Where
- Great Marton (FY3, FY1, FY4)
- Region
- Blackpool
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
More services for Great Marton
What affects the price in Great Marton
Repairs from £95. There’s no area surcharge for Great Marton. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How easy the damage is to reach
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Make sure they show:
- One picture of the entire bath
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
If you’re in Great Marton and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Our work in Great Marton
Great Marton is about 1 mile south-east of Blackpool, in Blackpool. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Great Marton is one of 12 towns and villages in Blackpool where we work. You can also see our page for Liverpool, about 28 miles away.
Our visits in FY3, FY1 and FY4 are booked in the same way as anywhere else. Local streets include Breck Road, Gorse Road and Tyne Avenue, all of which we cover. Other places close to Great Marton include Blackpool (1 mile north-west), Layton (2 miles north), Warbreck (2 miles north), North Shore (2 miles north-west) and Bispham (3 miles north).
What’s near Great Marton
Typical jobs here are in homes near St Paul's Church, Elmslie School and Devonshire Primary Academy. Other local landmarks include St John Vianney's Catholic Primary School (0.6 miles south-west), St Thomas' Church (1 mile north-west), Raikes Hall Hotel (0.8 miles north-west) and Stanley Park (less than half a mile north-west). Great Marton’s nearest station is Blackpool North station, about 1.3 miles north-west. Well-known places in the area include Blackpool Victoria Hospital (0.7 miles north-east) and Houndshill Shopping Centre (1.3 miles west). Open spaces near Great Marton include Marton Mere.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
- Do not leave a fresh chip for long
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why book with us
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- No need to remove anything
- Most jobs done in one visit
Take a look at our full price list and resurfacing vs replacement cost guide.
Do you need bath repair in Great Marton?
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people get in touch after spotting something like this:
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
Questions to ask before you book
- How your room will be protected
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Great Marton: your questions answered
Are there extra charges for Great Marton?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What areas do you cover?
Everywhere in the UK, Great Marton included. Travel is included in the price.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is a cracked acrylic bath repairable?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Great Marton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the entire surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
