Shropshire · England
Bath Repair in Homer
Bath repair for Homer, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- A hole punched through by something heavy
Bath repair in Homer, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you are dealing with chips along the edge of the bath and a chip where the taps sit, we can typically put it right.
We stand behind the work with a one-year guarantee.
- Where
- Homer (TF13)
- Region
- Shropshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How hard the colour is to match
- How many items we do on one visit
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Where you are, by postcode
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Our prices are the same across the UK, so there is no premium for Homer. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Homer customers choose us
- A fixed quote before you book
- Nothing taken out or refitted
- Straight answers about what a repair can do
- One visit for most repairs
See our pricing and resurfacing vs replacement cost guide.
How to care for the repair
Simple care helps the repair last. We recommend:
- Don’t leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
- Put a towel in the bath if you are working above it
- Give the bath a quick rinse after use
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Common questions in Homer
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long does the repair take to cure?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
What happens after I send pictures?
We come back with a fixed price. There is no obligation to book.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a few hours.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
How to prepare
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Landlord and trade work in Homer
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Homer as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Homer
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Homer and the surrounding area
Homer is about 7 miles south-west of Telford, in Shropshire. Jobs in Homer are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 433 places across Shropshire. You can also see our page for Birmingham, about 30 miles away.
All of TF13 is covered. We regularly work on streets such as The Glen and Copse Hill Lane and the roads around them. Other places close to Homer include Farley (1 mile north-east), Wyke (2 miles east), Posenhall (2 miles east), Buildwas (2 miles north-east) and Leighton (2 miles north). Larger places within reach include Shrewsbury (10 miles north-west), Madeley (5 miles east), Bridgnorth (8 miles south-east), Coleham (10 miles north-west), Kingsland (10 miles north-west) and Belle Vue (10 miles north-west).
Landmarks near Homer
Our clients here include homes close to Church of Holy Trinity, William Brookes School and William Brookes School and the streets around them. A little further out are Much Wenlock Museum (1 mile south).
Also in Homer
About our accreditations · Every repair comes with a one-year guarantee.
