Derbyshire · England
Bath chip & crack repair in Milton, Derbyshire
Bath repair across Milton and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- Chips on the rim or sides
Bath repair in Milton without replacing anything
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Whether it’s a kit repair that didn’t last and scuffs and scratches in the surface, we can usually put it right, on acrylic, roll-top & freestanding and whirlpool & spa baths alike.
A one-year guarantee comes as standard.
- Location
- Milton (DE65)
- Region
- Derbyshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Milton
- Colour mixed on the day to match
- One-year guarantee on every repair
- Straight answers about what a repair can do
- Work done at your home or business
Take a look at our full price list and bath cost comparison.
Covering Milton
Milton is about 4 miles north-east of Swadlincote, in Derbyshire. Wherever you are in the DE65 postcode area, we carry out the work at your property. We work in 532 places across Derbyshire, from the larger towns to small villages. You can also see our page for Birmingham, about 29 miles away.
Our visits in DE65 are booked in the same way as anywhere else. Nearby, we also work in Repton (1 mile west), Foremark (1 mile east), Twyford (1 mile north), Willington (2 miles north-west) and Stenson (2 miles north). Larger places within reach include Swadlincote (4 miles south-west), Ilkeston (13 miles north-east), Long Eaton (11 miles east), Belper (14 miles north), Heanor (15 miles north-east) and Langley Mill (15 miles north-east).
Near you in Milton
We visit homes around Repton Primary School, St Saviour's Church and The Bulls Head pub. The closest station to Milton is Willington station, roughly 2.1 miles north-west of the centre. A little further out are Bretby Castle (2.6 miles south-west) and Pastures Hospital (4.5 miles north).
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Keep a parking space free if you can
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Signs you need bath repair in Milton
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Send us a photo if you notice any of these:
- Impact holes in acrylic
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
What your quote should include
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
Keeping it looking good
Simple care helps the repair last. Our advice:
- Protect the bath with a towel when doing jobs nearby
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Ensure an acrylic bath is firm underfoot
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Your questions about bath repair in Milton
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Do you work in Milton?
Yes, we do. We send a technician to Milton for every job, and the price is the same as everywhere else.
How long before I can use the bath?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Can you repair something that’s been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Milton use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Places near Milton
Also in Milton
About our accreditations · Every repair comes with a one-year guarantee.
