Perth and Kinross · Scotland
Bath Repair for Pitcairngreen homes
Bath repair in Pitcairngreen without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Damage beneath the taps
- Deep scratches in acrylic
Do you need bath repair in Pitcairngreen?
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Contact us if you’ve noticed:
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- Deep scratches in acrylic
Comparing quotes
- Whether a trained technician does the job
- How changes to the job are handled
- What prep work is covered
- If travel is included in the price
Bath repair in Pitcairngreen without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the day after. If you’re dealing with deep scratches in acrylic and a chip where the taps sit, we can normally put it right.
We stand behind the work with a one-year guarantee.
- Area
- Pitcairngreen (PH1)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Pitcairngreen
Pitcairngreen is about 3 miles north-west of Perth, in Perth and Kinross. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover all 107 towns and villages across Perth and Kinross. Our jobs stretch from Pitcairngreen to Edinburgh (about 36 miles away).
Postcode districts we cover here: PH1. From Culloden House Court and Burnside Park or a nearby road, we can come to you. Close by, we cover Almondbank (1 mile south), Ruthvenfield (2 miles south-east), Huntingtower (2 miles south-east), Tibbermore (2 miles south) and Tulloch (2 miles south-east). Larger places within reach include Perth (3 miles south-east), Blairgowrie and Rattray (13 miles north-east), Crieff (13 miles west), Auchterarder (12 miles south-west), Kinross (15 miles south) and Letham (3 miles south-east).
Around Pitcairngreen
In Pitcairngreen, that means homes near Pitcairngreen and Bertha Park High School and the streets around them. Pitcairngreen’s nearest station is Perth station, roughly 4 miles south-east of the centre. Nearby you will also find Murray Royal Hospital (4.4 miles south-east) and Methven Castle (1.5 miles south-west). The countryside around Pitcairngreen includes Dupplin Lake and Mailer Hill.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. It normally takes two to three hours for most chips, and we will tell you if anything changes.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Honest limits
Before booking, it’s worth knowing the limits:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Questions from Pitcairngreen
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
For landlords and businesses
If you manage property in Pitcairngreen, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
Once the work has cured, treat it gently:
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
- Don’t leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Also near Pitcairngreen
Other services in Pitcairngreen
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- How easy the damage is to reach
- How many areas need work
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- One picture of the whole bath
- Natural light rather than flash
- Where you are, by postcode
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
