North Tyneside · England

Bath Repair in Point Pleasant

Damaged bath in Point Pleasant? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Chips caused by builders
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Point Pleasant

FAQs for Point Pleasant

What about rust by the waste?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Something went through my bath. Can it be fixed?

In most cases. Send us a picture of the hole and one from under the bath if you can.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is a bath repair permanent?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Do you work in Point Pleasant?

We do. We send a technician to Point Pleasant for every job, with no extra charge for travel.

Will I be able to see the repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Bath repair at your home in Point Pleasant

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. We are frequently asked to fix chips along the edge of the bath and scuffs and scratches in the surface, on whirlpool & spa baths, acrylic and pressed steel enamel.

You get a one-year guarantee, the same in Point Pleasant as everywhere else we work.

Rusty chip next to a bath plughole, before and after repair
Where
Point Pleasant (NE28, NE31, NE32)
Region
North Tyneside
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair cannot fix:

  • Acrylic cracks with no access behind them
  • A bath that moves underfoot, until its support is fixed
  • A bath worn all over, where resurfacing makes more sense

Not sure? Send photos and we will give you a straight answer before booking.

Surfaces we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

What happens on the day

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a few hours, depending on the damage.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area
  • Mention any earlier repairs or resurfacing

Get a quote

Upload a photo of the damage and one of the whole item, and tell us you’re in Point Pleasant, and we will reply with a fixed price.

Get a fixed quote

Related advice

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get any new chip repaired before it rusts
  • Avoid scourers, wire wool and gritty cream cleaners
  • Store metal items away from the bath

Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What bath repair costs

Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • How many areas need work
  • What kind of damage it is
  • What the surface is made of
  • Whether old repairs or coatings need taking off

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • A wider photo showing the entire bath
  • A coin beside the damage so we can judge size

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Our work in Point Pleasant

Point Pleasant is about 1 mile south-east of Wallsend, in North Tyneside. Jobs in Point Pleasant are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Point Pleasant is one of 30 towns and villages in North Tyneside we cover.

Postcode districts we cover here: NE28, NE31 and NE32. That includes homes on Gut Road, Kent Avenue and Ropery Lane and the roads around them. Point Pleasant is on the A187 and A193, so it’s easy for us to reach. If you’re just outside Point Pleasant, we cover Willington Quay (1 mile south-east), Wallsend (1 mile north-west), Hebburn (1 mile south), Low Walker (2 miles south-west) and Monkton (2 miles south). Larger places within reach include Tynemouth (3 miles north-east), Whitley Bay (4 miles north-east), North Shields (3 miles north-east), Longbenton (3 miles north-west), Cullercoats (4 miles north-east) and Killingworth (4 miles north-west).

Near you in Point Pleasant

In Point Pleasant, that means homes near Burnside Business and Enterprise College, West Park and Churchill Community College, among other places. You’ll also find Church of St Peter (under half a mile north-west), Albion Inn (less than half a mile east) and Wallsend St Peter's CofE Aided Primary School (within half a mile north-west). The closest station to Point Pleasant is Northumberland Park (Tyne and Wear) station, about 2.9 miles north of the centre. Other landmarks nearby include Silverlink Shopping Park (1.5 miles north) and Tynemouth Castle and Priory (4 miles north-east).

  • Parks and local facilities nearby include Municipal Borough of Wallsend (1.3 miles west)
Map of Point Pleasant © OpenStreetMap contributors

What we are called out for in Point Pleasant

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

If you can see any of these, send us a picture:

  • A chipped rim or side
  • A kit repair that didn’t last
  • Chips under the taps
  • Cracks in an acrylic bath

Before you book anyone

  • Whether they match the colour on site
  • The length of the guarantee and what it covers
  • Whether there are any call-out or travel charges
  • A fixed price, and whether VAT is included

10 questions to ask before booking

Repair or replace in Point Pleasant?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. The price reflects the work involved, not where you live. The full price is agreed before you book.

Why book with us

  • Rooms protected and left tidy
  • Technicians who travel to you, UK-wide
  • A year’s guarantee on all work
  • Nothing taken out or refitted

Read our pricing and bath cost comparison.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.