North Somerset · England
Bath Repair for Purn homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Purn and across North Somerset. Free, fixed quotes from your pictures.
- Repairs from £95
- A cracked acrylic bath
- A chipped rim or side
About our bath repair in Purn
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We are frequently asked to fix a chipped rim or side and rusty patches near the plughole, across whirlpool & spa baths, acrylic and cast iron enamel.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Purn (BS24)
- Region
- North Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What we cannot put right
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Cracks in acrylic we can’t reach from underneath
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly before you book.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
What we’re called out for in Purn
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
You may need us if you’ve spotted any of these:
- Holes from dropped items
- Damage beneath the taps
- Hairline or through cracks in acrylic
- Snagging damage from a refit
What to look for in a quote
- What protection goes down before work starts
- What preparation is included
- Whether they match the colour on site
- How changes to the job are handled
Your questions about bath repair in Purn
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
When can I have a bath again?
Typically within a day, though it depends on what we have done.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is a holed acrylic bath repairable?
Generally. Send us a picture of the hole and one from under the bath if you can.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Repairing versus replacing in Purn
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Purn
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Rooms protected and left tidy
Read our full price list or resurfacing vs replacement cost guide.
Landlord and trade work in Purn
We carry out planned and one-off repairs for housing associations and facilities teams in North Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Aftercare tips
Simple care helps the repair last. Our advice:
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- Check that an acrylic bath does not move when you stand in it
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Covering Purn
Purn is about 3 miles south of Weston-super-Mare, in North Somerset. Whether you are in the middle of Purn or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Purn is one of 86 towns and villages in North Somerset where we work.
We work across BS24. Streets in the area include Bridgwater Road and Accommodation Road, all of which we cover. We also cover the places around Purn: Bleadon (1 mile east), Uphill (1 mile north-west), Oldmixon (1 mile north), Hutton (2 miles north-east) and Elborough (3 miles north-east). We also work in nearby towns such as Weston-super-Mare (3 miles north), Portishead (15 miles north-east), Clevedon (10 miles north-east), Nailsea (12 miles north-east), Milton (3 miles north) and Yatton (8 miles north-east).
Around Purn
Around Purn, we work in homes near Church of St Peter & St Paul, Broadoak Academy and Oldmixon Primary School and the streets around them. The closest station to Purn is Weston-Super-Mare station, roughly 2.5 miles north of the centre. Other landmarks nearby include Locking Castle (3.1 miles north-east) and Weston General Hospital (1 mile north-west). Open spaces near Purn include Brean Down.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Other services in Purn
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We clean up when we are done and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
How to get a price
For a price in Purn, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
