Kent · England
Bath Repair in Tyler Hill
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Tyler Hill. Send photos for a free, fixed quote.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips caused by builders
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our bath repair in Tyler Hill
Most of our bath repairs take a few hours, and you can usually bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. If you’re dealing with rust spots around the plughole and a cracked acrylic bath, we can help, on roll-top & freestanding, pressed steel enamel and cast iron enamel alike.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Tyler Hill (CT2)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Tyler Hill
Other services in Tyler Hill
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. We charge the same wherever you are, so there is no premium for Tyler Hill. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Tyler Hill
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing and bath cost comparison.
When to call us in Tyler Hill
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
The most common problems we are called about are:
- A chipped rim or side
- Rusty patches near the plughole
- Impact holes in acrylic
- Cracks in an acrylic bath
Questions to ask before booking
- Whether the price is fixed and includes VAT
- How your room will be protected
- What prep work is covered
- Who will actually do the work
About Tyler Hill
Tyler Hill is about 2 miles north of Canterbury, in Kent. Across the CT2 area, a technician comes to you. Tyler Hill is one of 922 towns and villages in Kent where we work. You can also see our page for London, about 52 miles away.
Here we cover the CT2 postcode area. Streets in the area include St Johns Crescent, Link Road and Summer Lane. We also travel to Hackington (1 mile south-east), Blean (1 mile west), Honey Hill (2 miles west), Radfall (2 miles north) and Denstroude (2 miles west). Larger places within reach include Ashford (15 miles south-west), Margate (15 miles east), Dover (15 miles south-east), Sittingbourne (15 miles west), Ramsgate (15 miles east) and Whitstable (3 miles north-west).
Near you in Tyler Hill
Locally, our jobs take us to homes close to Church of St Cosmus and St Damian, St Edmund's School and Tyler Hill Meadow. Nearby too are Blean Primary School (1 mile south-west) and The Archbishop's School (1 mile south). Tyler Hill’s nearest station is Canterbury West station, about 1.6 miles south of the centre. Well-known places in the area include Whitefriars Shopping Centre (2.2 miles south) and Canterbury Castle (2.2 miles south). The countryside around Tyler Hill includes Blean Woods RSPB Reserve.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Keeping it looking good
Aftercare is simple:
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Open a window if you can
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What affects the price in Tyler Hill
Prices start from £95. We price every job individually, from your photos. The main factors are:
- How easy the damage is to reach
- The material and finish
- The size and number of damaged areas
- Any earlier repairs that need removing first
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Any details about the material
- The postcode, so we can plan the visit
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
FAQs for Tyler Hill
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How long before I can use the bath?
Most baths can be used the day after. We confirm the time before we leave.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
About our accreditations · Every repair comes with a one-year guarantee.
