Perth and Kinross · Scotland
Bath chip & crack repair in Stanley, Perth and Kinross
Chip and crack repairs to enamel, acrylic and cast iron baths in Stanley, carried out at your home and guaranteed for a year.
- Repairs from £95
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
Bath repair in Stanley without replacing anything
A typical bath repair is a few hours’ work, and you can normally bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Whether it’s a cracked acrylic bath and a chip where the taps sit, we can help, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Where
- Stanley (PH1)
- Area hub
- Perth and Kinross
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a few hours, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Clear the area around the damage
How to get a price
Email us a picture of the damage and a wider shot of the whole item, with your PH1 postcode, and we’ll reply with a fixed quote.
Read more
What bath repair costs
Prices start from £95. We price every job individually. What matters most is:
- How easy the damage is to reach
- Whether we combine several jobs
- What the surface is made of
- The size and number of damaged areas
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
When to call us in Stanley
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
The most common problems we are called about are:
- Chips under the taps
- Impact holes in acrylic
- Rusty patches near the plughole
- Snagging damage from a refit
What to look for in a quote
- A fixed price, and whether VAT is included
- Who turns up on the day
- How long it needs to cure
- How to look after the finish
What we can’t put right
We will not take on work that will not last, so here’s what a repair cannot put right:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Stanley and nearby
Stanley is about 6 miles north of Perth, in Perth and Kinross. From the centre of Stanley to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stanley is one of 107 towns and villages in Perth and Kinross we cover. Our jobs stretch from Stanley to Edinburgh (about 38 miles away).
Here we cover the PH1 postcode area. From Station Road, Murray Place and Mill Street or a nearby road, a technician can come to you. Neighbouring places we cover include West Tofts (1 mile north), Guildtown (2 miles east), Luncarty (2 miles south), Stormontfield (2 miles south) and Scone (5 miles south). Within a short drive, we also cover Perth (6 miles south), Blairgowrie and Rattray (9 miles north-east), Letham (6 miles south), Alyth (13 miles north-east), Coupar Angus (8 miles north-east) and Oakbank (6 miles south).
Around Stanley
Around Stanley, we work in homes near 49 King Street pub, St Columba's Episcopal Church and Stobhall New Library. Well-known places in the area include Perth Royal Infirmary (5.8 miles south) and Inchbervis Castle (0.8 miles east). Not far away are Lily Loch.
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Normally one visit, start to finish
- Everything repaired in place
Take a look at our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Nearby places to Stanley
What else we do in Stanley
Looking after it afterwards
Looking after the surface is easy:
- Clean with warm water and a mild detergent
- Put a towel in the bath if you’re working above it
- Rinse it down after each bath
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
For landlords and businesses
Landlords, letting agents and housing providers in Stanley use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
FAQs for Stanley
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
What happens after I send pictures?
We come back with a fixed price, plus dates. There’s no obligation to book.
Do you come to Stanley?
Yes, we do. We send a technician to Stanley for every job, with no extra charge for travel.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Something went through my bath. Can it be fixed?
Usually. Send us a photo of the hole and one from under the bath if you can.
About our accreditations · Every repair comes with a one-year guarantee.
